- WhichTractor size: Utility
- Not independently tested
- 1988–2002
- 3,044 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fendt Farmer 280 P/PA Full specifications
KHD F4L 913 four-cylinder diesel. The manufacturer claimed 79 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
79 hp
59 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”, claimed
- Weight
- 5,556 lb
- Hyd. flow
- 18.2 gpm
- Top speed
- 18.6–24.9 mph
Fendt Farmer 280 P/PA specs: key facts
The Fendt Farmer 280 P/PA was built from 1988 to 2002.
The Fendt Farmer 280 P/PA has a claimed engine power (gross or net not stated) of 59 kW (79 hp); it has no measured PTO figure.
The Fendt Farmer 280 P/PA was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Fendt Farmer 280 P/PA has a KHD F4L 913 engine, a 4-cylinder 4.09 L diesel unit.Source 1
The Fendt Farmer 280 P/PA weighs 2,520 kg (5,556 lb) unladen.
The Fendt Farmer 280 P/PA has an independent rear PTO running at 540/750 rpm.
The hydraulic pump of the Fendt Farmer 280 P/PA delivers 69.0 L/min (18.2 gpm).
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”
How much horsepower does a Farmer 280 P/PA have?
The only figure for the Farmer 280 P/PA is 79 hp (59 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”
What engine is in a Farmer 280 P/PA?
A Farmer 280 P/PA has a KHD F4L 913, a 4-cylinder 4.09 L diesel engine.
| Make & model | KHD F4L 913 |
|---|---|
| Cylinders | 4, air-cooledSource 2 |
| Displacement | 249.3 ci · 4.09 L |
| Max torque | 201 lb·ft · 272 N·m @ 1,600 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Deutz-Fahr DX 3.90”
How much will a Farmer 280 P/PA lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Farmer 280 P/PA are below.
| Pump flow | 18.2 gpm · 69.0 L/min |
|---|---|
| Pressure | 2,611 psi · 180 bar |
| Rear PTO | Independent, engine-driven, 540/750 rpm @ 2,287 engine rpmEngages under load |
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”
What transmission does a Farmer 280 P/PA have?
Transmission specifications for the Farmer 280 P/PA are below.
| Steering | Hydrostatic steering |
|---|---|
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”
How much does a Farmer 280 P/PA weigh?
A Farmer 280 P/PA weighs 5,556 lb (2,520 kg) unladen.
| Unladen weight | 5,556 lb · 2,520 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 8,818 lb · 4,000 kg |
| Wheelbase | 85.8 in · 2,180 mmtwo-wheel-drive version |
| Length | 143.5 in · 3,646 mm |
| Width | 65.6 in · 1,666 mm |
| Height | 88.0 in · 2,236 mm |
| Ground clearance | 10.1 in · 257 mm |
| Front track | 48.7 in · 1,236 mmtwo-wheel-drive version |
| Rear track | 50.7 in · 1,288 mm |
| Turning radius, braked | 10.8 ft · 3.30 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”
Which tractors compare with a Farmer 280 P/PA?
Within 10% of its 79 hp of claimed engine power, the same type, and first built within 15 years of it.
- Fiat 82-8679 hp engine, claimed · 1992–2000Side by side with the Farmer 280 P/PA →
- Fendt Farmer 280 VA79 hp engine, claimed · 1996–2002Side by side with the Farmer 280 P/PA →
- Fendt 208 FA79 hp engine, claimed · 2002–2009Side by side with the Farmer 280 P/PA →
- Fendt 208 PA79 hp engine, claimed · 2002–2009Side by side with the Farmer 280 P/PA →
- Fendt 208 VA/VA-breit79 hp engine, claimed · 2002–2009Side by side with the Farmer 280 P/PA →
- Massey Ferguson MF 393 (A)79.0 hp engine, claimed · 1987–1994Side by side with the Farmer 280 P/PA →
Everything else people ask
Is a Farmer 280 P/PA two-wheel drive or four-wheel drive?
The Fendt Farmer 280 P/PA was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a Farmer 280 P/PA have?
A Farmer 280 P/PA has a independent 540/750 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz-Fahr DX 3.90”; and Traktorenlexikon, “Fendt Farmer 280 P/PA”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Fahr DX 3.90 — CC BY-SA 4.0, WIKIBOOKS-TL-32890 · revision 1059337. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Fendt Farmer 280 P/PA — CC BY-SA 4.0, WIKIBOOKS-TL-99904 · revision 1059838. Wikibooks contributors (Traktorenlexikon). Original document