- WhichTractor size: Utility
- Not independently tested
- 1988–2002
- 3,044 built
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Fendt Farmer 280 P/PA Hydraulics & PTO specifications
12 hydraulics and PTO values on record for the Farmer 280 P/PA.
Engine power, claimed · gross or net not stated
79 hp
59 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”, claimed
What hydraulics does a Farmer 280 P/PA have?
Hydraulic and hitch specifications for the Farmer 280 P/PA are below.
| Pump flow | 18.2 gpm · 69.0 L/min |
|---|---|
| Steering pump flow | 7.4 gpm · 28.0 L/min |
| Hydraulic pressure | 2,611 psi · 180 bar |
| Rear remote valves | 6 |
| Lift capacity (point not stated) | 5,445 lb · 2,470 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”
What PTO does a Farmer 280 P/PA have?
A Farmer 280 P/PA has a 540/750 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/750 rpm |
| Engine speed at 540 PTO | 2,287 rpm |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Fendt Farmer 280 P/PA”
Where this page comes from
12 hydraulics and PTO values from Traktorenlexikon, “Fendt Farmer 280 P/PA”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fendt Farmer 280 P/PA — CC BY-SA 4.0, WIKIBOOKS-TL-99904 · revision 1059838. Wikibooks contributors (Traktorenlexikon). Original document