- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1958–1961
- 4,623 built
WhichTractor size, not the maker’s category
The source says so, in a sentence about this machine. How we decide what a machine is
Fendt Farmer 1 specs: hp, weight, years
The manufacturer claimed 24.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
24.5 hp
18.3 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt Farmer 1”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 3,186 lb
- Hyd. flow
- 4.2 gpm
- Top speed
- 12.4 mph
Fendt Farmer 1 specs: key facts
The Fendt Farmer 1 was built from 1958 to 1961.
The Fendt Farmer 1 has a claimed engine power (gross or net not stated) of 18.3 kW (24.5 hp); it has no measured PTO figure.
The Fendt Farmer 1 is two-wheel drive (2WD).
The Fendt Farmer 1 weighs 1,445 kg (3,186 lb) unladen.
The Fendt Farmer 1 has a rear PTO running at 540 rpm.
The hydraulic pump of the Fendt Farmer 1 delivers 16 L/min (4.2 gpm).
Source · Traktorenlexikon, “Fendt Farmer 1”

How much horsepower does a Farmer 1 have?
The only figure for the Farmer 1 is 24.5 hp (18.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fendt Farmer 1”
How much will a Farmer 1 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Farmer 1 are below.
| Pump flow | 4.2 gpm · 16 L/min |
|---|---|
| Pressure | 1,707 psi · 118 bar |
| Rear PTO | 540 rpm |
Source · Traktorenlexikon, “Fendt Farmer 1”
What transmission does a Farmer 1 have?
Transmission specifications for the Farmer 1 are below.
| Brakes | Foot-operated internal shoe servo brake acting on the rear wheels |
|---|---|
| Steering | Worm steering organically built into the clutch housing |
| Top speed | 12.4 mph · 20 km/h |
Source · Traktorenlexikon, “Fendt Farmer 1”
How much does a Farmer 1 weigh?
A Farmer 1 weighs 3,186 lb (1,445 kg) unladen.
| Unladen weight | 3,186 lb · 1,445 kg |
|---|---|
| Maximum permissible mass | 5,071 lb · 2,300 kg |
| Wheelbase | 71.3 in · 1,810 mm |
| Length | 115.9 in · 2,945 mm |
| Width | 62.0 in · 1,575 mm |
| Height | 62.6 in · 1,590 mm |
| Ground clearance | 13.8 in · 350 mm |
| Front track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles |
| Rear track | 49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles |
| Turning radius, braked | 10.1 ft · 3.07 m |
Source · Traktorenlexikon, “Fendt Farmer 1”
What oil does a Farmer 1 take, and how much?
A Farmer 1 engine takes 5.3 qt (5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 5.3 qt · 5 LSource: Traktorenlexikon, “Fendt Farmer 1” · single source, not independently verified |
| Transmission | 6.9 qt · 6.5 LSource: Traktorenlexikon, “Fendt Farmer 1” · single source, not independently verified |
| Hydraulic | 4.2 qt · 4 LSource: Traktorenlexikon, “Fendt Farmer 1” · single source, not independently verified |
| Cooling system | 8.5 qt · 8 LSource: Traktorenlexikon, “Fendt Farmer 1” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a Farmer 1?
Within 10% of its 24 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- Kramer KWD 25024 hp PTO, claimed · 1958–1959Side by side with the Farmer 1 →
- Fahr D 18124 hp PTO, claimed · 1955–1958Side by side with the Farmer 1 →
- Fahr D 25 NH24 hp PTO, claimed · 1953Side by side with the Farmer 1 →
- Fahr D 25N24 hp PTO, claimed · 1953Side by side with the Farmer 1 →
- Fahr D 2524 hp PTO, claimed · 1951–1953Side by side with the Farmer 1 →
- Fiat 300 (DT)23.7 hp PTO, claimed · 1971–1978Side by side with the Farmer 1 →
Common questions about the Fendt Farmer 1
Is a Farmer 1 two-wheel drive or four-wheel drive?
The Fendt Farmer 1 is two-wheel drive (2WD).
What PTO does a Farmer 1 have?
A Farmer 1 has a 540 rpm rear PTO.
Sources and how this page was built
Compiled from Traktorenlexikon, “Fendt Farmer 1”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fendt Farmer 1 — CC BY-SA 4.0, WIKIBOOKS-TL-23840 · revision 1032336. Wikibooks contributors (Traktorenlexikon). Original document