• WhichTractor size: Utility
  • No lab test on file
  • 2002–2009
  • 227 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fendt 208 PA specs: hp, weight, years

The manufacturer claimed 79 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

79 hp

59 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fendt Farmer 208 PA”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,404 lb
Hyd. flow
19.5 gpm
Top speed
24.9 mph

Fendt 208 PA specs: key facts

  • The Fendt 208 PA was built from 2002 to 2009.

  • The Fendt 208 PA has a claimed engine power (gross or net not stated) of 59 kW (79 hp); it has no measured PTO figure.

  • The Fendt 208 PA is four-wheel drive (4WD).

  • The Fendt 208 PA weighs 2,905 kg (6,404 lb) unladen.

  • The Fendt 208 PA has an independent rear PTO running at 540/750/1000 rpm.

  • The hydraulic pump of the Fendt 208 PA delivers 74.0 L/min (19.5 gpm).

Source · Traktorenlexikon, “Fendt Farmer 208 PA”

How does the 208 PA compare with its class?

  • Strength:

    A hydraulic pump flow of 74 L/min is high for its class — 71% above the median of 43.3 L/min across the 290 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 366 comparable records. How we work this out

How much horsepower does a 208 PA have?

The only figure for the 208 PA is 79 hp (59 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
79 hp

Source · Traktorenlexikon, “Fendt Farmer 208 PA”

How much will a 208 PA lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 208 PA are below.

Hydraulics & PTO — 208 PA hydraulics and PTO specifications
SystemLoad sensing
Pump flow19.5 gpm · 74.0 L/min
Pressure2,901 psi · 200 bar
Rear PTOIndependent, engine-driven, 540/750/1000 rpmEngages under load

Source · Traktorenlexikon, “Fendt Farmer 208 PA”

What transmission does a 208 PA have?

Transmission specifications for the 208 PA are below.

Transmission — 208 PA transmission specifications
ClutchDry multi-disc clutch
SteeringHydrostatic steering
Top speed24.9 mph · 40 km/h

Source · Traktorenlexikon, “Fendt Farmer 208 PA”

How much does a 208 PA weigh?

A 208 PA weighs 6,404 lb (2,905 kg) unladen.

Weights & dimensions — 208 PA weights and dimensions
Unladen weight6,404 lb · 2,905 kg
Maximum permissible mass11,023 lb · 5,000 kg
Wheelbase87.4 in · 2,221 mm
Length144.3 in · 3,665 mm
Width65.6 in · 1,666 mm
Height95.3 in · 2,420 mm
Ground clearance15.6 in · 395 mm
Front track46.3 in · 1,177 mm
Rear track50.7 in · 1,288 mm

Source · Traktorenlexikon, “Fendt Farmer 208 PA”

Which tractors compare with a 208 PA?

Within 10% of its 79 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Fendt 208 PA

Is a 208 PA two-wheel drive or four-wheel drive?

The Fendt 208 PA is four-wheel drive (4WD).

What PTO does a 208 PA have?

A 208 PA has a independent 540/750/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Fendt Farmer 208 PA”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fendt Farmer 208 PA — CC BY-SA 4.0, WIKIBOOKS-TL-99937 · revision 990726. Wikibooks contributors (Traktorenlexikon). Original document