- Vehicle type: unspecified
- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1979–1987
- 1,170 built
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Fendt Farmer 204P specs: hp, weight, years
KHD F4L 912 four-cylinder diesel. The manufacturer claimed 63.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
63.8 hp
47.6 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fendt Farmer 204 P”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 5,159 lb
- Hyd. flow
- 8.6 gpm
- Top speed
- 18.6 mph
Fendt Farmer 204P specs: key facts
The Fendt Farmer 204P was built from 1979 to 1987.
The Fendt Farmer 204P has a claimed engine power (gross or net not stated) of 47.6 kW (63.8 hp); it has no measured PTO figure.
The Fendt Farmer 204P was offered in two-wheel-drive and four-wheel-drive versions.
The Fendt Farmer 204P has a KHD F4L 912 engine, a 4-cylinder 3.77 L diesel unit.Source 1
The Fendt Farmer 204P weighs 2,340 kg (5,159 lb) unladen.
The Fendt Farmer 204P has an independent rear PTO running at 540 rpm.
The hydraulic pump of the Fendt Farmer 204P delivers 32.7 L/min (8.6 gpm).
Source · Traktorenlexikon, “Fendt Farmer 204 P”
How much horsepower does a Farmer 204P have?
The only figure for the Farmer 204P is 63.8 hp (47.6 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fendt Farmer 204 P”
What engine is in a Farmer 204P?
A Farmer 204P has a KHD F4L 912, a 4-cylinder 3.77 L diesel engine.
| Make & model | KHD F4L 912Source 1 |
|---|---|
| Cylinders | 4, air-cooledSource 1 |
| Displacement | 229.9 ci · 3.77 LSource 1 |
| Max torque | 185 lb·ft · 251 N·m @ 1,451 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fendt Farmer 204 P”
How much will a Farmer 204P lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Farmer 204P are below.
| Pump flow | 8.6 gpm · 32.7 L/min |
|---|---|
| Rear PTO | Independent, engine-driven, 540 rpm @ 2,044 engine rpmEngages under load |
| PTO shaft | 1 3/8"-6 splines (Form-A) |
Source · Traktorenlexikon, “Fendt Farmer 204 P”
What transmission does a Farmer 204P have?
Transmission specifications for the Farmer 204P are below.
| Clutch | Air-cooled double dry clutch |
|---|---|
| Brakes | Air-cooled hydraulically actuated full disc brake acting on differential side shafts |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Fendt Farmer 204 P”
How much does a Farmer 204P weigh?
A Farmer 204P weighs 5,159 lb (2,340 kg) unladen.
| Unladen weight | 5,159 lb · 2,340 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 85.2 in · 2,165 mmtwo-wheel-drive version |
| Length | 144.5 in · 3,670 mm |
| Width | 54.6 in · 1,388 mm |
| Height | 89.1 in · 2,263 mm |
| Ground clearance | 13.8 in · 350 mmtwo-wheel-drive version |
| Front track | 44.1 in · 1,120 mmtwo-wheel-drive version |
| Rear track | 46.7 in · 1,186 mmtwo-wheel-drive version |
| Turning radius, braked | 11.4 ft · 3.46 m |
Source · Traktorenlexikon, “Fendt Farmer 204 P”
What oil does a Farmer 204P take, and how much?
A Farmer 204P engine takes 9.8 qt (9.3 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 9.8 qt · 9.3 LSource: Traktorenlexikon, “Fendt Farmer 204 P” · single source, not independently verified |
| Transmission | 29.6 qt · 28 LSource: Traktorenlexikon, “Fendt Farmer 204 P” · single source, not independently verified |
| Hydraulic | 12.7 qt · 12 LSource: Traktorenlexikon, “Fendt Farmer 204 P” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a Farmer 204P?
Within 10% of its 61.2 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- International Harvester 78461.2 hp PTO, claimed · 1977–1981Side by side with the Farmer 204P →
- International Harvester 785 (A)61.2 hp PTO, claimed · 1981–1990Side by side with the Farmer 204P →
- Massey Ferguson 3050E61.0 hp PTO, claimed · 1988–1995Side by side with the Farmer 204P →
- International Harvester 66460.9 hp PTO, claimed · 1972–1973Side by side with the Farmer 204P →
- SAME Corsaro 7060.9 hp PTO, claimed · 1972–1980Side by side with the Farmer 204P →
- Massey Ferguson 184 (A)61.5 hp PTO, claimed · 1980–1983Side by side with the Farmer 204P →
Common questions about the Fendt Farmer 204P
Is a Farmer 204P two-wheel drive or four-wheel drive?
The Fendt Farmer 204P was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a Farmer 204P have?
A Farmer 204P has a independent 540 rpm rear PTO on a 1 3/8"-6 splines (Form-A) shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Deutz D 6006”; and Traktorenlexikon, “Fendt Farmer 204 P”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz D 6006 — CC BY-SA 4.0, WIKIBOOKS-TL-51755 · revision 1024090. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Fendt Farmer 204 P — CC BY-SA 4.0, WIKIBOOKS-TL-82755 · revision 990718. Wikibooks contributors (Traktorenlexikon). Original document