• Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1971–1974
  • 2,320 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Fendt Farmer 1D specs: hp, weight, years

MWM D 325-3 three-cylinder diesel. The manufacturer claimed 33.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

33.4 hp

24.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fendt Farmer 1 D”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
3,913 lb
3-point lift
3,307 lb
Hyd. flow
4.6 gpm
Top speed
12.4–15.5 mph

Fendt Farmer 1D specs: key facts

  • The Fendt Farmer 1D was built from 1971 to 1974.

  • The Fendt Farmer 1D has a claimed engine power (gross or net not stated) of 24.9 kW (33.4 hp); it has no measured PTO figure.

  • The Fendt Farmer 1D is two-wheel drive (2WD).

  • The Fendt Farmer 1D has a MWM D 325-3 engine, a 3-cylinder 2.55 L diesel unit.Source 2

  • The Fendt Farmer 1D weighs 1,775 kg (3,913 lb) unladen.

  • The Fendt Farmer 1D has a dependent rear PTO running at 540/600 rpm.

  • The three-point hitch of the Fendt Farmer 1D lifts 1,500 kg (3,307 lb) at the lower-link ends.

  • The hydraulic pump of the Fendt Farmer 1D delivers 17.6 L/min (4.6 gpm).

Source · Traktorenlexikon, “Fendt Farmer 1 D”

How does the Farmer 1D compare with its class?

  • Limitation:

    A 31 L fuel tank is low for its class — 31% below the median of 45 L across the 135 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 149 comparable records. How we work this out

Illustration of the 1971–1974 Fendt Farmer 1 D, a 33 hp farm tractor, a drawing generated from its specification record
Illustration — not a photograph

How much horsepower does a Farmer 1D have?

The only figure for the Farmer 1D is 33.4 hp (24.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
33.4 hp

Source · Traktorenlexikon, “Fendt Farmer 1 D”

What engine is in a Farmer 1D?

A Farmer 1D has an MWM D 325-3, a 3-cylinder 2.55 L diesel engine.

Engine — Farmer 1D engine specifications
Make & modelMWM D 325-3
Cylinders3, air-cooledSource 1
Displacement155.7 ci · 2.55 L
Electrical system12 VSource 1

Source · Traktorenlexikon, “Renault 60 R7253”

How much will a Farmer 1D lift, and what is its hydraulic flow?

A Farmer 1D lifts 3,307 lb (1,500 kg) at the lower-link ends.

Hydraulics & PTO — Farmer 1D hydraulics and PTO specifications
Pump flow4.6 gpm · 17.6 L/min
Pressure2,538 psi · 175 bar
Lift at ends3,307 lb · 1,500 kg
Rear PTODependent, transmission-driven, 540/600 rpm @ 1,890 engine rpm

Source · Traktorenlexikon, “Fendt Farmer 1 D”

What transmission does a Farmer 1D have?

Transmission specifications for the Farmer 1D are below.

Transmission — Farmer 1D transmission specifications
ClutchSingle-plate dry clutch
SteeringZF Gemmer steering
Top speed12.4–15.5 mph · 20–25 km/hthe article lists alternatives

Source · Traktorenlexikon, “Fendt Farmer 1 D”

How much does a Farmer 1D weigh?

A Farmer 1D weighs 3,913 lb (1,775 kg) unladen.

Weights & dimensions — Farmer 1D weights and dimensions
Unladen weight3,913 lb · 1,775 kg
Maximum permissible mass5,732 lb · 2,600 kg
Wheelbase78.5 in · 1,994 mm
Length130.2 in · 3,308 mm
Width59.9 in · 1,522 mm
Height91.1 in · 2,315 mm
Ground clearance16.3 in · 415 mm
Front track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives
Turning radius, braked11.0 ft · 3.35 m

Source · Traktorenlexikon, “Fendt Farmer 1 D”

What oil does a Farmer 1D take, and how much?

A Farmer 1D engine takes 8.2 qt (7.75 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Farmer 1D fluid capacities, grades and service intervals
SystemCapacity
Engine oil8.2 qt · 7.75 LSource: Traktorenlexikon, “Fendt Farmer 1 D” · single source, not independently verified
Transmission16.4 qt · 15.5 LSource: Traktorenlexikon, “Fendt Farmer 1 D” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a Farmer 1D?

Within 10% of its 33.4 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Fendt Farmer 1D

Is a Farmer 1D two-wheel drive or four-wheel drive?

The Fendt Farmer 1D is two-wheel drive (2WD).

What PTO does a Farmer 1D have?

A Farmer 1D has a dependent 540/600 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Renault 60 R7253”; and Traktorenlexikon, “Fendt Farmer 1 D”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fendt Farmer 1 D — CC BY-SA 4.0, WIKIBOOKS-TL-98233 · revision 1061936. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Renault 60 R7253 — CC BY-SA 4.0, WIKIBOOKS-TL-79816 · revision 1068193. Wikibooks contributors (Traktorenlexikon). Original document