WhichTractor
  • Vehicle type: unspecified
  • WhichTractor size: Utility
  • No lab test on file
  • 1972–1974
  • 730 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Fendt Farmer 102 specs: hp, weight, years

3 D 325-3 three-cylinder diesel or Ab 1972 = MWM D 325-3 diesel. The manufacturer claimed 39.3 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

39.3 hp

29.3 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fendt Farmer 102”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,049 lb
Hyd. flow
8.0 gpm
Top speed
16.0 mph

Fendt Farmer 102 specs: key facts

  • The Fendt Farmer 102 was built from 1972 to 1974.

  • The Fendt Farmer 102 has a claimed engine power (gross or net not stated) of 29.3 kW (39.3 hp); it has no measured PTO figure.

  • The Fendt Farmer 102 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.Source 2

  • The Fendt Farmer 102 has a 3 D 325-3 engine, a 3-cylinder 2.55 L diesel unit.

  • The Fendt Farmer 102 weighs 2,290 kg (5,049 lb) unladen.

  • The Fendt Farmer 102 has an independent rear PTO running at 559 rpm.

  • The hydraulic pump of the Fendt Farmer 102 delivers 30.5 L/min (8.0 gpm).

Source · Traktorenlexikon, “Fendt Farmer 102”

How does the Farmer 102 compare with its class?

  • Strength:

    13 forward gears is high for its class — 117% above the median of 6 across the 181 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 182 comparable records. How we work this out

Fendt Farmer 102 tractor
Photo: Joost J. Bakker from IJmuiden, CC BY 2.0 via Wikimedia Commons · Wrong photo?

How much horsepower does a Farmer 102 have?

The only figure for the Farmer 102 is 39.3 hp (29.3 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
39.3 hp

Source · Traktorenlexikon, “Fendt Farmer 102”

What engine is in a Farmer 102?

A Farmer 102 has a 3 D 325-3, a 3-cylinder 2.55 L diesel engine. Diesel tractors have a Ab 1972 = MWM D 325-3. Diesel tractors have a Ab 1972 = MWM D 325-3.

Engine — Farmer 102 engine specifications
Make & model3 D 325-3
Cylinders3, air-cooled
Displacement155.6 ci · 2.55 L
Electrical system12 V

Source · Traktorenlexikon, “Fendt Farmer 102”

How much will a Farmer 102 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the Farmer 102 are below.

Hydraulics & PTO — Farmer 102 hydraulics and PTO specifications
Pump flow8.0 gpm · 30.5 L/min
Pressure2,489 psi · 172 barSource 2
Rear PTOIndependent, engine-driven, 559 rpm

Source · Traktorenlexikon, “Fendt Farmer 102”

What transmission does a Farmer 102 have?

Transmission specifications for the Farmer 102 are below.

Transmission — Farmer 102 transmission specifications
ClutchDouble-sprung Tornado single-disc dry clutch for normal driving
BrakesFoot-operated internal cam brake acting mechanically on rear wheels
SteeringGemmer steering
Top speed16.0 mph · 25.8 km/h

Source · Traktorenlexikon, “Fendt Farmer 102”

How much does a Farmer 102 weigh?

A Farmer 102 weighs 5,049 lb (2,290 kg) unladen.

Weights & dimensions — Farmer 102 weights and dimensions
Unladen weight5,049 lb · 2,290 kg
Maximum permissible mass8,433 lb · 3,825 kg
Wheelbase82.0 in · 2,083 mm
Length142.7 in · 3,625 mm
Width67.2 in · 1,706 mm
Height92.7 in · 2,354 mm
Ground clearance15.2 in · 385 mm
Front track53.5 in · 1,360 mm
Rear track53.5–59.1 in · 1,360–1,500 mmthe article lists alternatives
Turning radius, braked12.0 ft · 3.65 m

Source · Traktorenlexikon, “Fendt Farmer 102”

What oil does a Farmer 102 take, and how much?

A Farmer 102 engine takes 8.2 qt (7.75 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

Farmer 102 fluid capacities, grades and service intervals
SystemCapacity
Engine oil8.2 qt · 7.75 LSource: Traktorenlexikon, “Fendt Farmer 102” · single source, not independently verified
Transmission3.3 qt · 3 LSource: Traktorenlexikon, “Fendt Farmer 102” · single source, not independently verified
Front axle6.3 qt · 6 LSource: Traktorenlexikon, “Fendt Farmer 102 S/SA” · single source, not independently verified
Final drives3.1 qt · 2.9 LSource: Traktorenlexikon, “Fendt Farmer 102 S/SA” · single source, not independently verified
Cooling system10.6 qt · 10 LSource: Traktorenlexikon, “Fendt Farmer 102 S/SA” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a Farmer 102?

Within 10% of its 39.3 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Fendt Farmer 102

Is a Farmer 102 two-wheel drive or four-wheel drive?

The Fendt Farmer 102 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.

What PTO does a Farmer 102 have?

A Farmer 102 has a independent 559 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Fendt Farmer 102”; and Traktorenlexikon, “Fendt Farmer 102 S/SA”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fendt Farmer 102 — CC BY-SA 4.0, WIKIBOOKS-TL-52653 · revision 990542. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fendt Farmer 102 S/SA — CC BY-SA 4.0, WIKIBOOKS-TL-98276 · revision 1032001. Wikibooks contributors (Traktorenlexikon). Original document