11 material differences · fewer than 12
Tractor oneDeutz (KHD) D 45061972–1980No measured PTO figureTractor twoFendt Farmer 1021972–1974No measured PTO figure
Which should you choose?
Read our verdict on the D 4506 and the Farmer 102 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | D 4506 | Farmer 102 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 39.3 hp | 39.3 hp | — |
| Engine declared | KHD F3L 912 | 3 D 325-3 | differs |
| Displacement declared | 2.83 L | 2.55 L | +11% D 4506 |
| Maximum torque declared | 95 lb·ft · 129 N·m | — | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 16.0 mph · 25.8 km/h | +29% Farmer 102 |
| Clutch declared | Pedal operated dry double clutch with independent PTO clutch | Double-sprung Tornado single-disc dry clutch for normal driving | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 7.2 gpm · 27.2 L/min | 8.0 gpm · 30.5 L/min | +12% Farmer 102 |
| Pressure declared | 2,538 psi · 175 bar | 2,489 psi · 172 bar | — |
| Rear PTO speeds declared | 540 rpm | 559 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 4,233 lb · 1,920 kg | 5,049 lb · 2,290 kg | +19% Farmer 102 |
| Maximum permissible mass declared | 7,716 lb · 3,500 kg | 8,433 lb · 3,825 kg | +9% Farmer 102 |
| Wheelbase declared | 78.7 in · 2,000 mm | 82.0 in · 2,083 mm | — |
| Length declared | 136.6 in · 3,470 mm | 142.7 in · 3,625 mm | — |
| Width declared | 66.9 in · 1,700 mm | 67.2 in · 1,706 mm | — |
| Ground clearance declared | 16.9 in · 430 mm | 15.2 in · 385 mm | +12% D 4506 |
| Turning radius, braked declared | 10.5 ft · 3.19 m | 12.0 ft · 3.65 m | +14% Farmer 102 |
| Fuel tank declared | 74.0 qt · 70 L | 68.7 qt · 65 L | +8% D 4506 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Deutz (KHD) D 4506 sources
- Source: Traktorenlexikon, “Deutz D 4506”
- Source: Traktorenlexikon, “Deutz D 4006 P”
Fendt Farmer 102 sources
- Source: Traktorenlexikon, “Fendt Farmer 102”
- Source: Traktorenlexikon, “Fendt Farmer 102 S/SA”