WhichTractor
  • Vehicle type: unspecified
  • Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1953
  • 65 built

WhichTractor size, not the maker’s category

We looked and the record does not say what this machine is. How we decide what a machine is

Fahr D 25 NH Full specifications

KHD F2M 414 two-cylinder diesel. The manufacturer claimed 24.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

24.7 hp

18.4 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Fahr D 25 NH”, claimed

Weight
4,299 lb
Top speed
12.2 mph

Fahr D 25 NH specs: key facts

  • The Fahr D 25 NH was built in 1953.

  • The Fahr D 25 NH has a claimed engine power (gross or net not stated) of 18.4 kW (24.7 hp); it has no measured PTO figure.

  • The Fahr D 25 NH is two-wheel drive (2WD).

  • The Fahr D 25 NH has a KHD F2M 414 engine, a 2-cylinder 2.20 L diesel unit.Source 1

  • The Fahr D 25 NH weighs 1,950 kg (4,299 lb) unladen.

  • The Fahr D 25 NH has an independent rear PTO running at 540 rpm.

Source · Traktorenlexikon, “Fahr D 25 NH”

How much horsepower does a D 25 NH have?

The only figure for the D 25 NH is 24.7 hp (18.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
24.7 hp

Source · Traktorenlexikon, “Fahr D 25 NH”

What engine is in a D 25 NH?

A D 25 NH has a KHD F2M 414, a 2-cylinder 2.20 L diesel engine.

Engine — D 25 NH engine specifications
Make & modelKHD F2M 414
Cylinders2, liquid-cooledSource 2
Displacement134.1 ci · 2.20 L
Max torque88 lb·ft · 120 N·m @ 1,100 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Fahr D 22”

How much will a D 25 NH lift?

Hydraulic and PTO specifications for the D 25 NH are below.

Hydraulics & PTO — D 25 NH hydraulics and PTO specifications
Pressure3,129 psi · 216 bar
Rear PTOIndependent, transmission-driven, 540 rpm
PTO shaft29 x 34,9 x 8,7 mm

Source · Traktorenlexikon, “Fahr D 25 NH”

What transmission does a D 25 NH have?

Transmission specifications for the D 25 NH are below.

Transmission — D 25 NH transmission specifications
SteeringZF steering, type: 202 with fixed steering finger
Top speed12.2 mph · 19.7 km/h

Source · Traktorenlexikon, “Fahr D 25 NH”

How much does a D 25 NH weigh?

A D 25 NH weighs 4,299 lb (1,950 kg) unladen.

Weights & dimensions — D 25 NH weights and dimensions
Unladen weight4,299 lb · 1,950 kg
Maximum permissible mass7,937 lb · 3,600 kg
Maximum front axle load3,704 lb · 1,680 kg
Maximum rear axle load4,233 lb · 1,920 kg
Wheelbase73.1 in · 1,856 mm
Length120.9 in · 3,070 mm
Width63.8 in · 1,620 mm
Height67.7 in · 1,720 mm
Ground clearance17.5 in · 445 mm
Front track52.8–60.3 in · 1,340–1,532 mm
Rear track50.6–57.7 in · 1,286–1,466 mm
Turning radius, braked11.0 ft · 3.35 m

Source · Traktorenlexikon, “Fahr D 25 NH”

Which tractors compare with a D 25 NH?

Within 10% of its 24 hp at the PTO (claimed), the same type, and first built within 15 years of it.

Everything else people ask

Is a D 25 NH two-wheel drive or four-wheel drive?

The Fahr D 25 NH is two-wheel drive (2WD).

What PTO does a D 25 NH have?

A D 25 NH has a independent 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Fahr D 25 NH”; and Traktorenlexikon, “Fahr D 22”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Fahr D 22 — CC BY-SA 4.0, WIKIBOOKS-TL-49043 · revision 990478. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Fahr D 25 NH — CC BY-SA 4.0, WIKIBOOKS-TL-103613 · revision 990482. Wikibooks contributors (Traktorenlexikon). Original document