- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1953
- 251 built
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fahr D 25 N Full specifications
KHD F2M 414 two-cylinder diesel. The manufacturer claimed 24.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
24.7 hp
18.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fahr D 25 N”, claimed
- Weight
- 4,085 lb
- Top speed
- 11.8 mph
Fahr D 25 N specs: key facts
The Fahr D 25 N was built in 1953.
The Fahr D 25 N has a claimed engine power (gross or net not stated) of 18.4 kW (24.7 hp); it has no measured PTO figure.
The Fahr D 25 N is two-wheel drive (2WD).
The Fahr D 25 N has a KHD F2M 414 engine, a 2-cylinder 2.20 L diesel unit.Source 1
The Fahr D 25 N weighs 1,853 kg (4,085 lb) unladen.
The Fahr D 25 N has an independent rear PTO running at 540 rpm.
Source · Traktorenlexikon, “Fahr D 25 N”
How much horsepower does a D 25 N have?
The only figure for the D 25 N is 24.7 hp (18.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fahr D 25 N”
What engine is in a D 25 N?
A D 25 N has a KHD F2M 414, a 2-cylinder 2.20 L diesel engine.
| Make & model | KHD F2M 414 |
|---|---|
| Cylinders | 2, liquid-cooledSource 2 |
| Displacement | 134.1 ci · 2.20 L |
| Max torque | 88 lb·ft · 120 N·m @ 1,100 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Fahr D 22”
How much will a D 25 N lift?
Hydraulic and PTO specifications for the D 25 N are below.
| Pressure | 3,129 psi · 216 bar |
|---|---|
| Rear PTO | Independent, transmission-driven, 540 rpm |
Source · Traktorenlexikon, “Fahr D 25 N”
What transmission does a D 25 N have?
Transmission specifications for the D 25 N are below.
| Steering | ZF steering type 202 with fixed steering finger |
|---|---|
| Top speed | 11.8 mph · 19 km/h |
Source · Traktorenlexikon, “Fahr D 25 N”
How much does a D 25 N weigh?
A D 25 N weighs 4,085 lb (1,853 kg) unladen.
| Unladen weight | 4,085 lb · 1,853 kg |
|---|---|
| Maximum permissible mass | 7,275 lb · 3,300 kg |
| Wheelbase | 73.1 in · 1,856 mm |
| Length | 115.2 in · 2,926 mm |
| Width | 62.5 in · 1,588 mm |
| Height | 64.6 in · 1,640 mm |
| Ground clearance | 14.0 in · 355 mm |
| Front track | 48.5–58.3 in · 1,232–1,480 mm |
| Rear track | 50.6–57.7 in · 1,286–1,466 mm |
| Turning radius, braked | 11.0 ft · 3.35 m |
Source · Traktorenlexikon, “Fahr D 25 N”
Which tractors compare with a D 25 N?
Within 10% of its 24 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Fahr D 18124 hp PTO, claimed · 1955–1958Side by side with the D 25 N →
- Güldner A 3 K Burgund23.6 hp PTO, claimed · 1959–1962Side by side with the D 25 N →
- Güldner A 3 KTA (Burgund-T)23.6 hp PTO, claimed · 1962–1965Side by side with the D 25 N →
- International Harvester 32323.5 hp PTO, claimed · 1966–1974Side by side with the D 25 N →
- Massey Ferguson MF 2524.0 hp PTO, claimed · 1961–1963Side by side with the D 25 N →
- Steyr 18823.3 hp PTO, claimed · 1960–1966Side by side with the D 25 N →
Everything else people ask
Is a D 25 N two-wheel drive or four-wheel drive?
The Fahr D 25 N is two-wheel drive (2WD).
What PTO does a D 25 N have?
A D 25 N has a independent 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Fahr D 25 N”; and Traktorenlexikon, “Fahr D 22”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fahr D 22 — CC BY-SA 4.0, WIKIBOOKS-TL-49043 · revision 990478. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Fahr D 25 N — CC BY-SA 4.0, WIKIBOOKS-TL-103611 · revision 990481. Wikibooks contributors (Traktorenlexikon). Original document