- Rigid chassis
- WhichTractor size: Compact
- Not independently tested
- 1971–1978
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Fiat 300 (DT) Full specifications
FIAT-IVECO 8025.01.200 or 300 two-cylinder diesel. The manufacturer claimed 30.6 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
30.6 hp
22.8 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fiat 300/300 DT”, claimed
- Weight
- 2,690 lb
- 3-point lift
- 1,433 lb
- Hyd. flow
- 2.5 gpm
- Top speed
- 15.5 mph
Fiat 300 (DT) specs: key facts
The Fiat 300 (DT) was built from 1971 to 1978.
The Fiat 300 (DT) has a claimed engine power (gross or net not stated) of 22.8 kW (30.6 hp); it has no measured PTO figure.
The Fiat 300 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The Fiat 300 (DT) has a FIAT-IVECO 8025.01.200 or 300 engine, a 2-cylinder 1.73 L diesel unit.
The Fiat 300 (DT) weighs 1,220 kg (2,690 lb) unladen.
The Fiat 300 (DT) has a dependent rear PTO running at 540 rpm.
The three-point hitch of the Fiat 300 (DT) lifts 650 kg (1,433 lb) at the lower-link ends.
The hydraulic pump of the Fiat 300 (DT) delivers 9.3 L/min (2.5 gpm).
Source · Traktorenlexikon, “Fiat 300/300 DT”
How much horsepower does a 300 (DT) have?
The only figure for the 300 (DT) is 30.6 hp (22.8 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fiat 300/300 DT”
What engine is in a 300 (DT)?
A 300 (DT) has a FIAT-IVECO 8025.01.200 or 300, a 2-cylinder 1.73 L diesel engine.
| Make & model | FIAT-IVECO 8025.01.200 or 300 |
|---|---|
| Cylinders | 2, liquid-cooled |
| Displacement | 105.4 ci · 1.73 L |
| Max torque | 71 lb·ft · 96 N·m @ 1,200 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Fiat 300/300 DT”
How much will a 300 (DT) lift, and what is its hydraulic flow?
A 300 (DT) lifts 1,433 lb (650 kg) at the lower-link ends of its Category 1 three-point hitch.
| Pump flow | 2.5 gpm · 9.3 L/min |
|---|---|
| Hitch category | Category 1 |
| Lift at ends | 1,433 lb · 650 kg |
| Rear PTO | Dependent, transmission-driven, 540 rpm @ 2,117 engine rpmGround-speed PTO available |
Source · Traktorenlexikon, “Fiat 300/300 DT”
What transmission does a 300 (DT) have?
Transmission specifications for the 300 (DT) are below.
| Clutch | Pedal-operated dry FIAT single-plate clutch |
|---|---|
| Steering | Mechanical steering with pinion and bevel gear |
| Top speed | 15.5 mph · 25 km/h |
Source · Traktorenlexikon, “Fiat 300/300 DT”
How much does a 300 (DT) weigh?
A 300 (DT) weighs 2,690 lb (1,220 kg) unladen.
| Unladen weight | 2,690 lb · 1,220 kgDT: 1,395 |
|---|---|
| Wheelbase | 66.9 in · 1,700 mmDT: 1,730 |
| Length | 107.9 in · 2,740 mm |
| Width | 60.6 in · 1,540 mm |
| Height | 61.8 in · 1,570 mm |
| Ground clearance | 18.5 in · 470 mm |
| Front track | 41.3–65.0 in · 1,050–1,650 mmDT: 1,300 |
| Rear track | 39.4–66.9 in · 1,000–1,700 mm |
| Turning radius, braked | 9.5 ft · 2.89 m |
Source · Traktorenlexikon, “Fiat 300/300 DT”
Which tractors compare with a 300 (DT)?
Within 10% of its 23.7 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Güldner A 3 KTA (Burgund-T)23.6 hp PTO, claimed · 1962–1965Side by side with the 300 (DT) →
- Güldner A 3 K Burgund23.6 hp PTO, claimed · 1959–1962Side by side with the 300 (DT) →
- International Harvester 32323.5 hp PTO, claimed · 1966–1974Side by side with the 300 (DT) →
- Massey Ferguson MF 2524.0 hp PTO, claimed · 1961–1963Side by side with the 300 (DT) →
- Steyr 188 n23.3 hp PTO, claimed · 1965–1966Side by side with the 300 (DT) →
- Steyr 18823.3 hp PTO, claimed · 1960–1966Side by side with the 300 (DT) →
Everything else people ask
Is a 300 (DT) two-wheel drive or four-wheel drive?
The Fiat 300 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 300 (DT) have?
A 300 (DT) has a dependent 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Fiat 300/300 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fiat 300/300 DT — CC BY-SA 4.0, WIKIBOOKS-TL-108357 · revision 1073405. Wikibooks contributors (Traktorenlexikon). Original document