- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1951–1953
- 1,748 built
WhichTractor size, not the maker’s category
The source says so, in a sentence about this machine. How we decide what a machine is
Fahr D 25 specs: hp, weight, years
KHD F2M 414 two-cylinder diesel. The manufacturer claimed 24.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
24.7 hp
18.4 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Fahr D 25”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 3,937 lb
- Top speed
- 14.2 mph
Fahr D 25 specs: key facts
The Fahr D 25 was built from 1951 to 1953.
The Fahr D 25 has a claimed engine power (gross or net not stated) of 18.4 kW (24.7 hp); it has no measured PTO figure.
The Fahr D 25 is two-wheel drive (2WD).
The Fahr D 25 has a KHD F2M 414 engine, a 2-cylinder 2.20 L diesel unit.Source 1
The Fahr D 25 weighs 1,786 kg (3,937 lb) unladen.
The Fahr D 25 has an independent rear PTO running at 540 rpm.
Source · Traktorenlexikon, “Fahr D 25”
How much horsepower does a D 25 have?
The only figure for the D 25 is 24.7 hp (18.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Fahr D 25”
What engine is in a D 25?
A D 25 has a KHD F2M 414, a 2-cylinder 2.20 L diesel engine.
| Make & model | KHD F2M 414 |
|---|---|
| Cylinders | 2, liquid-cooledSource 2 |
| Displacement | 134.1 ci · 2.20 L |
| Max torque | 88 lb·ft · 120 N·m @ 1,100 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Fahr D 22”
How much will a D 25 lift?
Hydraulic and PTO specifications for the D 25 are below.
| Pressure | 3,129 psi · 216 bar |
|---|---|
| Rear PTO | Independent, transmission-driven, 540 rpm |
| PTO shaft | 29 x 34,9 x 8,7 mm |
Source · Traktorenlexikon, “Fahr D 25”
What transmission does a D 25 have?
Transmission specifications for the D 25 are below.
| Steering | ZF steering type 202 with fixed steering finger |
|---|---|
| Top speed | 14.2 mph · 22.9 km/h |
Source · Traktorenlexikon, “Fahr D 25”
How much does a D 25 weigh?
A D 25 weighs 3,937 lb (1,786 kg) unladen.
| Unladen weight | 3,937 lb · 1,786 kg |
|---|---|
| Maximum permissible mass | 4,960 lb · 2,250 kg |
| Wheelbase | 70.3 in · 1,786 mm |
| Length | 112.6 in · 2,860 mm |
| Width | 60.6 in · 1,540 mm |
| Height | 56.0 in · 1,422 mm |
| Ground clearance | 12.6 in · 320 mm |
| Front track | 48.5–58.3 in · 1,232–1,480 mmWikibooks gives one track for both axles |
| Rear track | 48.5–58.3 in · 1,232–1,480 mmWikibooks gives one track for both axles |
| Turning radius, braked | 11.0 ft · 3.35 m |
Source · Traktorenlexikon, “Fahr D 25”
What oil does a D 25 take, and how much?
A D 25 engine takes 10.6 qt (10 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 10.6 qt · 10 LSource: Traktorenlexikon, “Fahr D 25” · single source, not independently verified |
| Transmission | 0.3 qt · 0 LSource: Traktorenlexikon, “Fahr D 25” · single source, not independently verified |
| Hydraulic | 5.8 qt · 5.5 LSource: Traktorenlexikon, “Fahr D 25” · single source, not independently verified |
| Cooling system | 14.8 qt · 14 LSource: Traktorenlexikon, “Fahr D 25” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a D 25?
Within 10% of its 24 hp at the PTO as the maker claimed it, with no laboratory test on file, the same type, and first built within 15 years of it.
- Fahr D 18124 hp PTO, claimed · 1955–1958Side by side with the D 25 →
- Fendt Farmer 124 hp PTO, claimed · 1958–1961Side by side with the D 25 →
- Kramer KWD 25024 hp PTO, claimed · 1958–1959Side by side with the D 25 →
- Güldner A 3 K Burgund23.6 hp PTO, claimed · 1959–1962Side by side with the D 25 →
- Güldner A 3 KTA (Burgund-T)23.6 hp PTO, claimed · 1962–1965Side by side with the D 25 →
- International Harvester 32323.5 hp PTO, claimed · 1966–1974Side by side with the D 25 →
Common questions about the Fahr D 25
Is a D 25 two-wheel drive or four-wheel drive?
The Fahr D 25 is two-wheel drive (2WD).
What PTO does a D 25 have?
A D 25 has a independent 540 rpm rear PTO on a 29 x 34,9 x 8,7 mm shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Fahr D 22”; and Traktorenlexikon, “Fahr D 25”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Fahr D 22 — CC BY-SA 4.0, WIKIBOOKS-TL-49043 · revision 990478. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Fahr D 25 — CC BY-SA 4.0, WIKIBOOKS-TL-49046 · revision 990479. Wikibooks contributors (Traktorenlexikon). Original document