9 material differences · fewer than 12
Tractor oneFendt Farmer 204 P1979–1987No measured PTO figureTractor twoInternational Harvester 785 (A)1981–1990No measured PTO figure
Which should you choose?
Read our verdict on the Farmer 204 P and the 785 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | Farmer 204 P | 785 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 63.8 hp | 75.9 hp | +19% 785 (A) |
| Engine declared | KHD F4L 912 | INTERNATIONAL-HARVESTER D-246 | differs |
| Displacement declared | 3.77 L | 4.03 L | +7% 785 (A) |
| Maximum torque declared | 185 lb·ft · 251 N·m | 190 lb·ft · 258 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 15.5 mph · 25 km/h | +20% Farmer 204 P |
| Clutch declared | Air-cooled double dry clutch | Pedal-operated dry Laycock single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.6 gpm · 32.7 L/min | — | — |
| Pressure declared | — | 2,698 psi · 186 bar | — |
| Rear PTO speeds declared | 540 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,159 lb · 2,340 kg | 6,702 lb · 3,040 kg | +30% 785 (A) |
| Wheelbase declared | 85.2 in · 2,165 mm | 88.2 in · 2,240 mm | — |
| Length declared | 144.5 in · 3,670 mm | 147.2 in · 3,740 mm | — |
| Width declared | 54.6 in · 1,388 mm | 75.6 in · 1,920 mm | +38% 785 (A) |
| Ground clearance declared | 13.8 in · 350 mm | 15.6 in · 396 mm | +13% 785 (A) |
| Turning radius, braked declared | 11.4 ft · 3.46 m | 11.5 ft · 3.51 m | — |
| Fuel tank declared | 67.6 qt · 64 L | 118.3 qt · 112.0 L | +75% 785 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Fendt Farmer 204 P sources
- Source: Traktorenlexikon, “Fendt Farmer 204 P”
- Source: Traktorenlexikon, “Deutz D 6006”
International Harvester 785 (A) sources
- Source: Traktorenlexikon, “IHC 785 (XL)”
- Source: Traktorenlexikon, “IHC 784”