• Rigid chassis
  • WhichTractor size: Utility
  • Not independently tested
  • 1974–1978
  • 132 built

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Hermann Lanz D 634 Full specifications

MWM D 226-2 two-cylinder diesel. The manufacturer claimed 33.4 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

33.4 hp

24.9 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “HELA D634”, claimed

Weight
3,924 lb
3-point lift
4,079 lb
Top speed
17.5 mph

Hermann Lanz D 634 specs: key facts

  • The Hermann Lanz D 634 was built from 1974 to 1978.

  • The Hermann Lanz D 634 has a claimed engine power (gross or net not stated) of 24.9 kW (33.4 hp); it has no measured PTO figure.

  • The Hermann Lanz D 634 is two-wheel drive (2WD).

  • The Hermann Lanz D 634 has a MWM D 226-2 engine, a 2-cylinder 2.08 L diesel unit.

  • The Hermann Lanz D 634 weighs 1,780 kg (3,924 lb) unladen.

  • The Hermann Lanz D 634 has an independent rear PTO running at 580/1120 rpm.

  • The three-point hitch of the Hermann Lanz D 634 lifts 1,850 kg (4,079 lb) at the lower-link ends.

Source · Traktorenlexikon, “HELA D634”

How much horsepower does a D 634 have?

The only figure for the D 634 is 33.4 hp (24.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
33.4 hp

Source · Traktorenlexikon, “HELA D634”

What engine is in a D 634?

A D 634 has an MWM D 226-2, a 2-cylinder 2.08 L diesel engine.

Engine — D 634 engine specifications
Make & modelMWM D 226-2
Cylinders2, liquid-cooled
Displacement126.8 ci · 2.08 L
Electrical system12 V

Source · Traktorenlexikon, “HELA D634”

How much will a D 634 lift?

A D 634 lifts 4,079 lb (1,850 kg) at the lower-link ends of its Category 1 three-point hitch.

Hydraulics & PTO — D 634 hydraulics and PTO specifications
Hitch categoryCategory 1
Lift at ends4,079 lb · 1,850 kg
Rear PTOIndependent, engine-driven, 580/1120 rpm

Source · Traktorenlexikon, “HELA D634”

What transmission does a D 634 have?

Transmission specifications for the D 634 are below.

Transmission — D 634 transmission specifications
SteeringDust and oil-tight sealed worm steering running in oil bath
Top speed17.5 mph · 28.1 km/h

Source · Traktorenlexikon, “HELA D634”

How much does a D 634 weigh?

A D 634 weighs 3,924 lb (1,780 kg) unladen.

Weights & dimensions — D 634 weights and dimensions
Unladen weight3,924 lb · 1,780 kg
Wheelbase81.9 in · 2,080 mm
Length129.9 in · 3,300 mm
Width59.8 in · 1,520 mm
Height51.2 in · 1,300 mm
Ground clearance13.0 in · 330 mm
Front track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives
Rear track49.2–59.1 in · 1,250–1,500 mmWikibooks gives one track for both axles; the article lists alternatives

Source · Traktorenlexikon, “HELA D634”

Which tractors compare with a D 634?

Within 10% of its 33.4 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is a D 634 two-wheel drive or four-wheel drive?

The Hermann Lanz D 634 is two-wheel drive (2WD).

What PTO does a D 634 have?

A D 634 has a independent 580/1120 rpm rear PTO.

What serial numbers does a D 634 carry?

The source prints serial numbers 634 001 to 634 132.

Where this page comes from

Compiled from Traktorenlexikon, “HELA D634”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: HELA D634CC BY-SA 4.0, WIKIBOOKS-TL-83505 · revision 791726. Wikibooks contributors (Traktorenlexikon). Original document