- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1979–1980
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 1103/1103-4 Full specifications
VALMET 411 CS four-cylinder diesel. The manufacturer claimed 105.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
105.5 hp
78.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 1103”, claimed
- Weight
- 8,708 lb
- 3-point lift
- 7,165 lb
- Hyd. flow
- 9.2 gpm
- Top speed
- 18.6 mph
VALMET 1103/1103-4 specs: key facts
The VALMET 1103/1103-4 was built from 1979 to 1980.
The VALMET 1103/1103-4 has a claimed engine power (gross or net not stated) of 78.7 kW (105.5 hp); it has no measured PTO figure.
The VALMET 1103/1103-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The VALMET 1103/1103-4 has a VALMET 411 CS engine, a 4-cylinder 4.40 L diesel unit.Source 2
The VALMET 1103/1103-4 weighs 3,950 kg (8,708 lb) unladen.
The VALMET 1103/1103-4 has a rear PTO running at 540/1000 rpm.
The three-point hitch of the VALMET 1103/1103-4 lifts 3,250 kg (7,165 lb) at the lower-link ends.
The hydraulic pump of the VALMET 1103/1103-4 delivers 35.0 L/min (9.2 gpm).
Source · Traktorenlexikon, “Valmet 1103”
How much horsepower does an 1103/1103-4 have?
The only figure for the 1103/1103-4 is 105.5 hp (78.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 1103”
What engine is in an 1103/1103-4?
An 1103/1103-4 has a VALMET 411 CS, a 4-cylinder 4.40 L diesel engine.
| Make & model | VALMET 411 CSSource 2 |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 268.3 ci · 4.40 LSource 2 |
| Max torque | 273 lb·ft · 370 N·m @ 1,500 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Valmet 1103”
How much will an 1103/1103-4 lift, and what is its hydraulic flow?
An 1103/1103-4 lifts 7,165 lb (3,250 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 9.2 gpm · 35.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 7,165 lb · 3,250 kg |
| Rear PTO | 540/1000 rpm @ 1,746 engine rpm |
| PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Valmet 1103”
What transmission does an 1103/1103-4 have?
Transmission specifications for the 1103/1103-4 are below.
| Clutch | Dry Fichtel & Sachs double clutch |
|---|---|
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Valmet 1103”
How much does an 1103/1103-4 weigh?
An 1103/1103-4 weighs 8,708 lb (3,950 kg) unladen.
| Unladen weight | 8,708 lb · 3,950 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 91.3 in · 2,320 mmtwo-wheel-drive version |
| Length | 154.7 in · 3,930 mmtwo-wheel-drive version |
| Width | 78.0 in · 1,980 mmtwo-wheel-drive version |
| Height | 106.7 in · 2,710 mmtwo-wheel-drive version |
| Ground clearance | 20.5 in · 520 mmtwo-wheel-drive version |
| Front track | 58.7–66.5 in · 1,490–1,690 mmtwo-wheel-drive version |
| Rear track | 63.8–76.4 in · 1,620–1,940 mmtwo-wheel-drive version |
| Turning radius, braked | 12.1 ft · 3.70 m |
Source · Traktorenlexikon, “Valmet 1103”
Which tractors compare with an 1103/1103-4?
Within 10% of its 105.5 hp of claimed engine power, the same type, and first built within 15 years of it.
- AGRIFULL 80-105 DT105.5 hp engine, claimed · 1980–1986Side by side with the 1103/1103-4 →
- DEUTZ-ALLIS 8010105.5 hp engine, claimed · 1985–1988Side by side with the 1103/1103-4 →
- Massey Ferguson MF 3095 (A)105.5 hp engine, claimed · 1990–1995Side by side with the 1103/1103-4 →
- Deutz-Fahr AgroStar 6.08105.7 hp engine, claimed · 1993–1995Side by side with the 1103/1103-4 →
- WHITE 2-105105 hp engine, claimed · 1974–1982Side by side with the 1103/1103-4 →
- WHITE 6105106.5 hp engine, claimed · 1992–1997Side by side with the 1103/1103-4 →
Everything else people ask
Is an 1103/1103-4 two-wheel drive or four-wheel drive?
The VALMET 1103/1103-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an 1103/1103-4 have?
An 1103/1103-4 has a 540/1000 rpm rear PTO on a 1 3/8"- 6 splines shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 802”; and Traktorenlexikon, “Valmet 1103”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 1103 — CC BY-SA 4.0, WIKIBOOKS-TL-116423 · revision 998405. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Valmet 802 — CC BY-SA 4.0, WIKIBOOKS-TL-116345 · revision 997650. Wikibooks contributors (Traktorenlexikon). Original document