13 material differences

Tractor oneLandini 11800 (DT)1987–2000No measured PTO figureTractor twoVALMET 1103/1103-41979–1980No measured PTO figure

Which should you choose?

Read our verdict on the 11800 (DT) and the 1103/1103-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 3 fields identical or within 5%, which is not counted as material

Landini 11800 (DT) and VALMET 1103/1103-4, field by field
Field	11800 (DT)	1103/1103-4	Gap
Engine
Engine power, claimed claimed	105.7 hp	105.5 hp	—
Engine declared	PERKINS TW 6.354-4	VALMET 411 CS	differs
Displacement declared	5.80 L	4.40 L	+32% 11800 (DT)
Maximum torque declared	258 lb·ft · 350 N·m	273 lb·ft · 370 N·m	+6% 1103/1103-4
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry single-plate clutch	Dry Fichtel & Sachs double clutch	differs
Hydraulics & hitch
Pump flow declared	13.5 gpm · 51.2 L/min	9.2 gpm · 35.0 L/min	+46% 11800 (DT)
Three-point lift, at the coupling points declared	9,914 lb · 4,497 kg	7,165 lb · 3,250 kg	+38% 11800 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,678 lb · 4,390 kg	8,708 lb · 3,950 kg	+11% 11800 (DT)
Maximum permissible mass declared	15,432 lb · 7,000 kg	—	—
Wheelbase declared	106.1 in · 2,696 mm	91.3 in · 2,320 mm	+16% 11800 (DT)
Length declared	175.2 in · 4,450 mm	154.7 in · 3,930 mm	+13% 11800 (DT)
Width declared	83.9 in · 2,130 mm	78.0 in · 1,980 mm	+8% 11800 (DT)
Height, over the cab declared	110.6 in · 2,810 mm	106.7 in · 2,710 mm	—
Ground clearance declared	18.0 in · 457 mm	20.5 in · 520 mm	+14% 1103/1103-4
Turning radius, braked declared	—	12.1 ft · 3.70 m	—
Fuel tank declared	200.8 qt · 190.0 L	102.5 qt · 97.0 L	+96% 11800 (DT)

Source

Source