DEUTZ-ALLIS 8010 vs VALMET 1103/1103-4
9 material differences · fewer than 12
Which should you choose?
Read our verdict on the 8010 and the 1103/1103-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
9 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 8010 | 1103/1103-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 105.5 hp | 105.5 hp | — |
| Engine declared | ALLIS-CHALMERS 649 T | VALMET 411 CS | differs |
| Displacement declared | 4.93 L | 4.40 L | +12% 8010 |
| Maximum torque declared | — | 273 lb·ft · 370 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry Fichtel & Sachs double clutch | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 45.0 gpm · 170.3 L/min | 9.2 gpm · 35.0 L/min | +387% 8010 |
| Three-point lift at ends declared | — | 7,165 lb · 3,250 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,630 lb · 5,729 kg | 8,708 lb · 3,950 kg | +45% 8010 |
| Wheelbase declared | 106.0 in · 2,692 mm | 91.3 in · 2,320 mm | +16% 8010 |
| Length declared | 187.0 in · 4,750 mm | 154.7 in · 3,930 mm | +21% 8010 |
| Width declared | 92.6 in · 2,352 mm | 78.0 in · 1,980 mm | +19% 8010 |
| Height declared | 114.0 in · 2,896 mm | 106.7 in · 2,710 mm | +7% 8010 |
| Ground clearance declared | 21.0 in · 533 mm | 20.5 in · 520 mm | — |
| Turning radius, braked declared | 12.0 ft · 3.67 m | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 239.9 qt · 227.0 L | 102.5 qt · 97.0 L | +134% 8010 |
DEUTZ-ALLIS 8010 sources
Source
- Source: Traktorenlexikon, “Deutz-Allis 8010”
VALMET 1103/1103-4 sources
Source
- Source: Traktorenlexikon, “Valmet 1103”
- Source: Traktorenlexikon, “Valmet 802”