Eicher 3108 vs VALMET 1103/1103-4
11 material differences · fewer than 12
Which should you choose?
Read our verdict on the 3108 and the 1103/1103-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 3108 | 1103/1103-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 106 hp | 105.5 hp | — |
| Engine declared | Eicher EDL 6 - 4 | VALMET 411 CS | differs |
| Displacement declared | 5.89 L | 4.40 L | +34% 3108 |
| Maximum torque declared | — | 273 lb·ft · 370 N·m | — |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% 3108 |
| Clutch declared | Single-plate dry clutch with centrifugal cooling | Dry Fichtel & Sachs double clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 13.4 gpm · 50.6 L/min | 9.2 gpm · 35.0 L/min | +45% 3108 |
| Three-point lift at ends declared | — | 7,165 lb · 3,250 kg | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 11,905 lb · 5,400 kg | 8,708 lb · 3,950 kg | +37% 3108 |
| Wheelbase declared | 107.5 in · 2,730 mm | 91.3 in · 2,320 mm | +18% 3108 |
| Length declared | 167.7 in · 4,260 mm | 154.7 in · 3,930 mm | +8% 3108 |
| Width declared | 92.3 in · 2,345 mm | 78.0 in · 1,980 mm | +18% 3108 |
| Height declared | 108.3 in · 2,750 mm | 106.7 in · 2,710 mm | — |
| Ground clearance declared | 18.5 in · 470 mm | 20.5 in · 520 mm | +11% 1103/1103-4 |
| Turning radius, braked declared | — | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 254.7 qt · 241 L | 102.5 qt · 97.0 L | +148% 3108 |
Eicher 3108 sources
Source
- Source: Traktorenlexikon, “Eicher 3108”
VALMET 1103/1103-4 sources
Source
- Source: Traktorenlexikon, “Valmet 1103”
- Source: Traktorenlexikon, “Valmet 802”