- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1990–1995
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Massey Ferguson MF 3095 (A) Full specifications
Perkins 1006-6 HR3 six-cylinder diesel. The manufacturer claimed 105.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
105.5 hp
78.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Massey Ferguson MF 3095”, claimed
- Weight
- 9,645 lb
- 3-point lift
- 9,215 lb
- Top speed
- 18.6–24.9 mph
Massey Ferguson MF 3095 (A) specs: key facts
The Massey Ferguson MF 3095 (A) was built from 1990 to 1995.
The Massey Ferguson MF 3095 (A) has a claimed engine power (gross or net not stated) of 78.7 kW (105.5 hp); it has no measured PTO figure.
The Massey Ferguson MF 3095 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The Massey Ferguson MF 3095 (A) has a Perkins 1006-6 HR3 engine, a 6-cylinder 5.99 L diesel unit.
The Massey Ferguson MF 3095 (A) weighs 4,375 kg (9,645 lb) unladen.
The Massey Ferguson MF 3095 (A) has a rear PTO running at 540/1000 rpm.
The three-point hitch of the Massey Ferguson MF 3095 (A) lifts 4,180 kg (9,215 lb) at the lower-link ends.
Source · Traktorenlexikon, “Massey Ferguson MF 3095”
How much horsepower does an MF 3095 (A) have?
The only figure for the MF 3095 (A) is 105.5 hp (78.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Massey Ferguson MF 3095”
What engine is in an MF 3095 (A)?
An MF 3095 (A) has a Perkins 1006-6 HR3, a 6-cylinder 5.99 L diesel engine.
| Make & model | Perkins 1006-6 HR3 |
|---|---|
| Cylinders | 6, liquid-cooled |
| Displacement | 365.3 ci · 5.99 L |
| Max torque | 300 lb·ft · 407 N·m @ 1,255 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Massey Ferguson MF 3095”
How much will an MF 3095 (A) lift?
An MF 3095 (A) lifts 9,215 lb (4,180 kg) at the lower-link ends of its Category 2 three-point hitch.
| System | Open centre |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 9,215 lb · 4,180 kg |
| Rear PTO | 540/1000 rpm @ 1,980 engine rpm |
Source · Traktorenlexikon, “Massey Ferguson MF 3095”
What transmission does an MF 3095 (A) have?
Transmission specifications for the MF 3095 (A) are below.
| Clutch | Pedal-operated, dry and air-cooled VALEO single-plate clutch |
|---|---|
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Massey Ferguson MF 3095”
How much does an MF 3095 (A) weigh?
An MF 3095 (A) weighs 9,645 lb (4,375 kg) unladen.
| Unladen weight | 9,645 lb · 4,375 kgtwo-wheel-drive version |
|---|---|
| Maximum permissible mass | 15,432 lb · 7,000 kg |
| Wheelbase | 106.1 in · 2,696 mmtwo-wheel-drive version |
| Length | 170.2 in · 4,323 mm |
| Width | 74.8 in · 1,899 mm |
| Height | 109.2 in · 2,774 mm |
| Ground clearance | 18.0 in · 457 mm |
| Front track | 60.7–91.9 in · 1,543–2,333 mmtwo-wheel-drive version |
| Rear track | 60.2–76.8 in · 1,530–1,950 mm |
Source · Traktorenlexikon, “Massey Ferguson MF 3095”
Which tractors compare with an MF 3095 (A)?
Within 10% of its 105.5 hp of claimed engine power, the same type, and first built within 15 years of it.
- DEUTZ-ALLIS 8010105.5 hp engine, claimed · 1985–1988Side by side with the MF 3095 (A) →
- AGRIFULL 80-105 DT105.5 hp engine, claimed · 1980–1986Side by side with the MF 3095 (A) →
- VALMET 1103/1103-4105.5 hp engine, claimed · 1979–1980Side by side with the MF 3095 (A) →
- Deutz-Fahr AgroStar 6.08105.7 hp engine, claimed · 1993–1995Side by side with the MF 3095 (A) →
- WHITE 6105106.5 hp engine, claimed · 1992–1997Side by side with the MF 3095 (A) →
- John Deere 3055103.7 hp engine, claimed · 1992–1993Side by side with the MF 3095 (A) →
Everything else people ask
Is an MF 3095 (A) two-wheel drive or four-wheel drive?
The Massey Ferguson MF 3095 (A) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does an MF 3095 (A) have?
An MF 3095 (A) has a 540/1000 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Massey Ferguson MF 3095”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Massey Ferguson MF 3095 — CC BY-SA 4.0, WIKIBOOKS-TL-87084 · revision 992188. Wikibooks contributors (Traktorenlexikon). Original document