8 material differences · fewer than 12

Tractor oneAGRIFULL 80-105 DT1980–1986No measured PTO figureTractor twoVALMET 1103/1103-41979–1980No measured PTO figure

Which should you choose?

Read our verdict on the 80-105 DT and the 1103/1103-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 4 fields identical or within 5%, which is not counted as material

AGRIFULL 80-105 DT and VALMET 1103/1103-4, field by field
Field	80-105 DT	1103/1103-4	Gap
Engine
Engine power, claimed claimed	105.5 hp	105.5 hp	—
Engine declared	V.M.-MOTORI 1056 SU	VALMET 411 CS	differs
Displacement declared	5.71 L	4.40 L	+30% 80-105 DT
Maximum torque declared	—	273 lb·ft · 370 N·m	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 1103/1103-4
Clutch declared	—	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Pump flow declared	7.4 gpm · 28.0 L/min	9.2 gpm · 35.0 L/min	+25% 1103/1103-4
Pressure declared	3,118 psi · 215 bar	—	—
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	8,686 lb · 3,940 kg	8,708 lb · 3,950 kg	—
Wheelbase declared	104.3 in · 2,650 mm	91.3 in · 2,320 mm	+14% 80-105 DT
Length declared	163.8 in · 4,160 mm	154.7 in · 3,930 mm	+6% 80-105 DT
Width declared	105.1 in · 2,670 mm	78.0 in · 1,980 mm	+35% 80-105 DT
Height, over the cab declared	104.3 in · 2,650 mm	106.7 in · 2,710 mm	—
Ground clearance declared	15.4 in · 390 mm	20.5 in · 520 mm	+33% 1103/1103-4
Turning radius, braked declared	—	12.1 ft · 3.70 m	—
Fuel tank declared	—	102.5 qt · 97.0 L	—

Source

Source