• Rigid chassis
  • WhichTractor size: Standard-size
  • Not independently tested
  • 1980–1986

It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

AGRIFULL 80-105 DT Full specifications

V.M.-MOTORI 1056 SU six-cylinder diesel. The manufacturer claimed 105.5 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

105.5 hp

78.7 kW as stated by the source

Not independently tested

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Agrifull 80-105”, claimed

Weight
8,686 lb
Hyd. flow
7.4 gpm
Top speed
15.5 mph

AGRIFULL 80-105 DT specs: key facts

  • The AGRIFULL 80-105 DT was built from 1980 to 1986.

  • The AGRIFULL 80-105 DT has a claimed engine power (gross or net not stated) of 78.7 kW (105.5 hp); it has no measured PTO figure.

  • The AGRIFULL 80-105 DT is four-wheel drive (4WD).

  • The AGRIFULL 80-105 DT has a V.M.-MOTORI 1056 SU engine, a 6-cylinder 5.71 L diesel unit.

  • The AGRIFULL 80-105 DT weighs 3,940 kg (8,686 lb) unladen.

  • The AGRIFULL 80-105 DT has an independent rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the AGRIFULL 80-105 DT delivers 28.0 L/min (7.4 gpm).

Source · Traktorenlexikon, “Agrifull 80-105”

How much horsepower does an 80-105 DT have?

The only figure for the 80-105 DT is 105.5 hp (78.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
105.5 hp

Source · Traktorenlexikon, “Agrifull 80-105”

What engine is in an 80-105 DT?

An 80-105 DT has a V.M.-MOTORI 1056 SU, a 6-cylinder 5.71 L diesel engine.

Engine — 80-105 DT engine specifications
Make & modelV.M.-MOTORI 1056 SU
Cylinders6, air-cooled
Displacement348.6 ci · 5.71 L
Electrical system12 V

Source · Traktorenlexikon, “Agrifull 80-105”

How much will an 80-105 DT lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the 80-105 DT are below.

Hydraulics & PTO — 80-105 DT hydraulics and PTO specifications
Pump flow7.4 gpm · 28.0 L/min
Pressure3,118 psi · 215 bar
Hitch categoryCategory 2
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 2,125 engine rpmEngages under load
PTO shaft1 3/8"- 6 splines or 1 3/8"- 21 part

Source · Traktorenlexikon, “Agrifull 80-105”

What transmission does an 80-105 DT have?

Transmission specifications for the 80-105 DT are below.

Transmission — 80-105 DT transmission specifications
Steeringhydrostatic steering with double acting steering cylinder
Top speed15.5 mph · 25 km/h

Source · Traktorenlexikon, “Agrifull 80-105”

How much does an 80-105 DT weigh?

An 80-105 DT weighs 8,686 lb (3,940 kg) unladen.

Weights & dimensions — 80-105 DT weights and dimensions
Unladen weight8,686 lb · 3,940 kg
Wheelbase104.3 in · 2,650 mm
Length163.8 in · 4,160 mm
Width105.1 in · 2,670 mm
Height104.3 in · 2,650 mm
Ground clearance15.4 in · 390 mm
Front track67.3–84.3 in · 1,710–2,140 mm
Rear track59.1–86.6 in · 1,500–2,200 mm

Source · Traktorenlexikon, “Agrifull 80-105”

Which tractors compare with an 80-105 DT?

Within 10% of its 105.5 hp of claimed engine power, the same type, and first built within 15 years of it.

Everything else people ask

Is an 80-105 DT two-wheel drive or four-wheel drive?

The AGRIFULL 80-105 DT is four-wheel drive (4WD).

What PTO does an 80-105 DT have?

An 80-105 DT has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines or 1 3/8"- 21 part shaft.

Where this page comes from

Compiled from Traktorenlexikon, “Agrifull 80-105”.

Last verified

Not yet verified

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Agrifull 80-105CC BY-SA 4.0, WIKIBOOKS-TL-122073 · revision 1078906. Wikibooks contributors (Traktorenlexikon). Original document