- Rigid chassis
- WhichTractor size: Standard-size
- No lab test on file
- 1979–1980
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
VALMET 1103/1103-4 Hydraulics & PTO specs
9 hydraulics and PTO values on record for the 1103/1103-4.
Engine power, claimed · gross or net not stated
105.5 hp
78.7 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 1103”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will an 1103/1103-4 lift?
An 1103/1103-4 lifts 7,165 lb (3,250 kg) at the lower-link ends.
| Pump flow | 9.2 gpm · 35.0 L/min |
|---|---|
| Steering pump flow | 9.2 gpm · 35.0 L/min |
| Rear remote valves | 1 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 7,165 lb · 3,250 kg |
| Hitch control | Lifting, lowering, lowering throttle, position, draft and mixed control |
Source · Traktorenlexikon, “Valmet 1103”
What PTO does an 1103/1103-4 have?
An 1103/1103-4 has a 540/1000 rpm rear PTO.
| Rear PTO speeds | 540/1000 rpm |
|---|---|
| Engine speed at 540 PTO | 1,746 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines |
Source · Traktorenlexikon, “Valmet 1103”
Sources and how this page was built
9 hydraulics and PTO values from Traktorenlexikon, “Valmet 1103”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 1103 — CC BY-SA 4.0, WIKIBOOKS-TL-116423 · revision 998405. Wikibooks contributors (Traktorenlexikon). Original document