Deutz-Fahr AgroStar 6.08 vs VALMET 1103/1103-4

11 material differences · fewer than 12

Tractor one

1993–1995

No measured PTO figure

Tractor two

1979–1980

No measured PTO figure

Which should you choose?

Read our verdict on the AgroStar 6.08 and the 1103/1103-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

Deutz-Fahr AgroStar 6.08 and VALMET 1103/1103-4, field by field
Field	AgroStar 6.08	1103/1103-4	Gap
Engine
Engine power, claimed claimed	105.7 hp	105.5 hp	—
Engine declared	KHD F6L 913	VALMET 411 CS	differs
Displacement declared	6.13 L	4.40 L	+39% AgroStar 6.08
Maximum torque declared	282 lb·ft · 382 N·m	273 lb·ft · 370 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	—	Dry Fichtel & Sachs double clutch	—
Hydraulics & hitch
Pump flow declared	15.2 gpm · 57.5 L/min	9.2 gpm · 35.0 L/min	+64% AgroStar 6.08
Three-point lift at ends declared	11,464 lb · 5,200 kg	7,165 lb · 3,250 kg	+60% AgroStar 6.08
Rear PTO speeds declared	540/1000/750 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	10,009 lb · 4,540 kg	8,708 lb · 3,950 kg	+15% AgroStar 6.08
Maximum permissible mass declared	18,739 lb · 8,500 kg	—	—
Wheelbase declared	107.0 in · 2,718 mm	91.3 in · 2,320 mm	+17% AgroStar 6.08
Length declared	179.4 in · 4,556 mm	154.7 in · 3,930 mm	+16% AgroStar 6.08
Width declared	90.2 in · 2,290 mm	78.0 in · 1,980 mm	+16% AgroStar 6.08
Height declared	110.9 in · 2,818 mm	106.7 in · 2,710 mm	—
Ground clearance declared	20.9 in · 530 mm	20.5 in · 520 mm	—
Turning radius, braked declared	—	12.1 ft · 3.70 m	—
Fuel tank declared	179.6 qt · 170 L	102.5 qt · 97.0 L	+75% AgroStar 6.08

Source

Source