WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1987–2000

It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Landini 10800 (DT) specs: hp, weight, years

PERKINS TW 6.354-4 six-cylinder diesel. The manufacturer claimed 95.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

95.7 hp

71.4 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Landini 10800 DT”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
9,480 lb
3-point lift
9,921 lb
Hyd. flow
13.5 gpm
Top speed
18.6 mph

Landini 10800 (DT) specs: key facts

  • The Landini 10800 (DT) was built from 1987 to 2000.

  • The Landini 10800 (DT) has a claimed engine power (gross or net not stated) of 71.4 kW (95.7 hp); it has no measured PTO figure.

  • The Landini 10800 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

  • The Landini 10800 (DT) has a PERKINS TW 6.354-4 engine, a 6-cylinder 5.80 L diesel unit.

  • The Landini 10800 (DT) weighs 4,300 kg (9,480 lb) unladen.

  • The Landini 10800 (DT) has an independent rear PTO running at 540/1000 rpm.

  • The three-point hitch of the Landini 10800 (DT) lifts 4,500 kg (9,921 lb) at the lower-link ends.

  • The hydraulic pump of the Landini 10800 (DT) delivers 51.2 L/min (13.5 gpm).

Source · Traktorenlexikon, “Landini 10800 DT”

How does the 10800 (DT) compare with its class?

  • Strength:

    32 forward gears is high for its class — 113% above the median of 15 across the 338 machines within 10% of its power that hold this figure.

Derived by WhichTractor from 351 comparable records. How we work this out

Illustration of the 1987–2000 Landini 10800 (DT), a 96 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 10800 (DT) have?

The only figure for the 10800 (DT) is 95.7 hp (71.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
95.7 hp

Source · Traktorenlexikon, “Landini 10800 DT”

What engine is in a 10800 (DT)?

A 10800 (DT) has a PERKINS TW 6.354-4, a 6-cylinder 5.80 L diesel engine.

Engine — 10800 (DT) engine specifications
Make & modelPERKINS TW 6.354-4
Cylinders6, liquid-cooled
Displacement353.6 ci · 5.80 L
Max torque245 lb·ft · 332 N·m @ 1,300 rpm
Injectiondirect injection
Electrical system12 V

Source · Traktorenlexikon, “Landini 10800 DT”

How much will a 10800 (DT) lift, and what is its hydraulic flow?

A 10800 (DT) lifts 9,921 lb (4,500 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 10800 (DT) hydraulics and PTO specifications
Pump flow13.5 gpm · 51.2 L/min
Pressure2,901 psi · 200 bar
Hitch categoryCategory 2
Lift at ends9,921 lb · 4,500 kg
Rear PTOIndependent, engine-driven, 540/1000 rpm @ 1,980 engine rpmEngages under load

Source · Traktorenlexikon, “Landini 10800 DT”

What transmission does a 10800 (DT) have?

Transmission specifications for the 10800 (DT) are below.

Transmission — 10800 (DT) transmission specifications
Clutchpedal-operated dry single-disc clutch
Brakeshydraulically operated wet disc brake acting on differential side shafts
Steeringhydrostatic Danfoss steering, type: OSPC-ON
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Landini 10800 DT”

How much does a 10800 (DT) weigh?

A 10800 (DT) weighs 9,480 lb (4,300 kg) unladen.

Weights & dimensions — 10800 (DT) weights and dimensions
Unladen weight9,480 lb · 4,300 kgDT: 4,530
Maximum permissible mass15,432 lb · 7,000 kg
Wheelbase106.1 in · 2,696 mmDT: 2,699
Length175.2 in · 4,450 mm
Width83.9 in · 2,130 mm
Height108.7 in · 2,760 mm
Ground clearance16.1 in · 410 mmDT: 430
Front track60.7–83.9 in · 1,543–2,130 mmDT: 1,550-2,070
Rear track57.1–76.8 in · 1,450–1,950 mm

Source · Traktorenlexikon, “Landini 10800 DT”

What oil does a 10800 (DT) take, and how much?

A 10800 (DT) engine takes 20.1 qt (19.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

10800 (DT) fluid capacities, grades and service intervals
SystemCapacity
Engine oil20.1 qt · 19.0 LSource: Traktorenlexikon, “Landini 10800 DT” · single source, not independently verified
Hydraulic67.6 qt · 64.0 LSource: Traktorenlexikon, “Landini 10800 DT” · single source, not independently verified
Front axle6.9 qt · 6.5 LSource: Traktorenlexikon, “Landini 10800 DT” · single source, not independently verified
Cooling system25.5 qt · 24.1 LSource: Traktorenlexikon, “Landini 10800 DT” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 10800 (DT)?

Within 10% of its 95.7 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Landini 10800 (DT)

Is a 10800 (DT) two-wheel drive or four-wheel drive?

The Landini 10800 (DT) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 10800 (DT) have?

A 10800 (DT) has a independent 540/1000 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Landini 10800 DT”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Landini 10800 DT — CC BY-SA 4.0, WIKIBOOKS-TL-113034 · revision 991555. Wikibooks contributors (Traktorenlexikon). Original document