- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1987–2000
It sits on the utility/standard-size boundary, so either size is a fair description. WhichTractor size, not the maker’s category
Landini 10800 (DT) Hydraulics & PTO specifications
13 hydraulics and PTO values on record for the 10800 (DT).
Engine power, claimed · gross or net not stated
95.7 hp
71.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Landini 10800 DT”, claimed
How much will a 10800 (DT) lift?
A 10800 (DT) lifts 9,921 lb (4,500 kg) at the lower-link ends.
| Pump flow | 13.5 gpm · 51.2 L/min |
|---|---|
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves, optional | 3 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 9,921 lb · 4,500 kg |
| Front hitch available, optional | Yes |
Source · Traktorenlexikon, “Landini 10800 DT”
What PTO does a 10800 (DT) have?
A 10800 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 1,980 rpm |
| Front PTO available, optional | Yes |
| PTO power, claimed | 84.4 hp · 62.9 kWClaimed; standard not stated by the source |
Source · Traktorenlexikon, “Landini 10800 DT”
Where this page comes from
13 hydraulics and PTO values from Traktorenlexikon, “Landini 10800 DT”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Landini 10800 DT — CC BY-SA 4.0, WIKIBOOKS-TL-113034 · revision 991555. Wikibooks contributors (Traktorenlexikon). Original document