• WhichTractor size: Standard-size
  • No lab test on file
  • 1987
  • 5 built

It sits on the utility/standard-size boundary, so either size is a fair description. It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

Deutz-Fahr IN-trac 6.05 specs: hp, weight, years

Deutz F6L 912 six-cylinder diesel. The manufacturer claimed 97 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

97 hp

72 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
10,803 lb
Hyd. flow
14.8 gpm
Top speed
24.9 mph

Deutz-Fahr IN-trac 6.05 specs: key facts

  • The Deutz-Fahr IN-trac 6.05 was built in 1987.

  • The Deutz-Fahr IN-trac 6.05 has a claimed engine power (gross or net not stated) of 72 kW (97 hp); it has no measured PTO figure.

  • The Deutz-Fahr IN-trac 6.05 is four-wheel drive (4WD).

  • The Deutz-Fahr IN-trac 6.05 has a Deutz F6L 912 engine, a 6-cylinder 5.66 L diesel unit.

  • The Deutz-Fahr IN-trac 6.05 weighs 4,900 kg (10,803 lb) unladen.

  • The Deutz-Fahr IN-trac 6.05 has a rear PTO running at 540/1000 rpm.

  • The hydraulic pump of the Deutz-Fahr IN-trac 6.05 delivers 56.0 L/min (14.8 gpm).

Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”

Illustration of the 1987 Deutz-Fahr IN-trac 6.05, a 97 hp farm tractor, operator station not recorded — shown as an open platform, a drawing generated from its specification record
Illustration — not a photograph · operator station not recorded — shown as an open platform

How much horsepower does an IN-trac 6.05 have?

The only figure for the IN-trac 6.05 is 97 hp (72 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
97 hp

Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”

What engine is in an IN-trac 6.05?

An IN-trac 6.05 has a Deutz F6L 912, a 6-cylinder 5.66 L diesel engine.

Engine — IN-trac 6.05 engine specifications
Make & modelDeutz F6L 912
Cylinders6, air-cooled
Displacement345.1 ci · 5.66 L

Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”

How much will an IN-trac 6.05 lift, and what is its hydraulic flow?

Hydraulic and PTO specifications for the IN-trac 6.05 are below.

Hydraulics & PTO — IN-trac 6.05 hydraulics and PTO specifications
Pump flow14.8 gpm · 56.0 L/min
Hitch categoryCategory 2
Rear PTOengine-driven, 540/1000 rpmEngages under load
PTO shaft1 3/8 Zoll

Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”

What transmission does an IN-trac 6.05 have?

Transmission specifications for the IN-trac 6.05 are below.

Transmission — IN-trac 6.05 transmission specifications
BrakesHydraulic drum brake
SteeringHydrostatic steering
Top speed24.9 mph · 40 km/h

Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”

How much does an IN-trac 6.05 weigh?

An IN-trac 6.05 weighs 10,803 lb (4,900 kg) unladen.

Weights & dimensions — IN-trac 6.05 weights and dimensions
Unladen weight10,803 lb · 4,900 kg
Maximum permissible mass19,180 lb · 8,700 kg
Wheelbase106.4 in · 2,703 mm
Length196.9 in · 5,000 mm
Width90.6 in · 2,300 mm
Height122.8 in · 3,120 mm

Source · Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”

Which tractors compare with an IN-trac 6.05?

Within 10% of its 97 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the Deutz-Fahr IN-trac 6.05

Is an IN-trac 6.05 two-wheel drive or four-wheel drive?

The Deutz-Fahr IN-trac 6.05 is four-wheel drive (4WD).

What PTO does an IN-trac 6.05 have?

An IN-trac 6.05 has a 540/1000 rpm rear PTO on a 1 3/8 Zoll shaft.

Sources and how this page was built

Compiled from Traktorenlexikon, “Deutz-Fahr IN-trac 6.05”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Deutz-Fahr IN-trac 6.05 — CC BY-SA 4.0, WIKIBOOKS-TL-87350 · revision 940202. Wikibooks contributors (Traktorenlexikon). Original document