9 material differences · fewer than 12

Tractor oneDeutz-Fahr DX 6.051987–1991No measured PTO figureTractor twoLandini 10800 (DT)1987–2000No measured PTO figure

Which should you choose?

Read our verdict on the DX 6.05 and the 10800 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 9 fields identical or within 5%, which is not counted as material

Deutz-Fahr DX 6.05 and Landini 10800 (DT), field by field
Field	DX 6.05	10800 (DT)	Gap
Engine
Engine power, claimed claimed	97 hp	95.7 hp	—
Engine declared	KHD F6L 912	PERKINS TW 6.354-4	differs
Displacement declared	5.65 L	5.80 L	—
Maximum torque declared	266 lb·ft · 360 N·m	245 lb·ft · 332 N·m	+8% DX 6.05
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Independent dry double clutch	pedal-operated dry single-disc clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	12.9 gpm · 48.8 L/min	13.5 gpm · 51.2 L/min	—
Pressure declared	3,481 psi · 240 bar	2,901 psi · 200 bar	+20% DX 6.05
Three-point lift, at the coupling points declared	11,464 lb · 5,200 kg	9,921 lb · 4,500 kg	+16% DX 6.05
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	9,987 lb · 4,530 kg	9,480 lb · 4,300 kg	+5% DX 6.05
Maximum permissible mass declared	14,991 lb · 6,800 kg	15,432 lb · 7,000 kg	—
Wheelbase declared	105.0 in · 2,667 mm	106.1 in · 2,696 mm	—
Length declared	175.7 in · 4,464 mm	175.2 in · 4,450 mm	—
Width declared	87.0 in · 2,210 mm	83.9 in · 2,130 mm	—
Height, over the cab declared	106.7 in · 2,710 mm	108.7 in · 2,760 mm	—
Ground clearance declared	17.9 in · 455 mm	16.1 in · 410 mm	+11% DX 6.05
Turning radius, braked declared	16.0 ft · 4.87 m	—	—
Fuel tank declared	137.4 qt · 130 L	200.8 qt · 190.0 L	+46% 10800 (DT)

Source

Source