10 material differences · fewer than 12
Tractor oneLandini 10800 (DT)1987–2000No measured PTO figureTractor twoMassey Ferguson MF 399 (A)1987–1997No measured PTO figure
Which should you choose?
Read our verdict on the 10800 (DT) and the MF 399 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | 10800 (DT) | MF 399 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 95.7 hp | 95.7 hp | — |
| Engine declared | PERKINS TW 6.354-4 | Perkins A 6.354-4 | differs |
| Displacement declared | 5.80 L | 5.80 L | — |
| Maximum torque declared | 245 lb·ft · 332 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | pedal-operated dry single-disc clutch | Pedal operated, dry and air-cooled LuK single clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 13.5 gpm · 51.2 L/min | 16.7 gpm · 63.3 L/min | +24% MF 399 (A) |
| Pressure declared | 2,901 psi · 200 bar | 2,973–3,481 psi · 205–240 bar | differs |
| Three-point lift, at the coupling points declared | 9,921 lb · 4,500 kg | 7,937 lb · 3,600 kg | +25% 10800 (DT) |
| Rear PTO speeds declared | 540/1000 rpm | 540 rpm / 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 9,480 lb · 4,300 kg | 7,840 lb · 3,556 kg | +21% 10800 (DT) |
| Maximum permissible mass declared | 15,432 lb · 7,000 kg | — | — |
| Wheelbase declared | 106.1 in · 2,696 mm | 101.4 in · 2,576 mm | — |
| Length declared | 175.2 in · 4,450 mm | 168.5 in · 4,280 mm | — |
| Width declared | 83.9 in · 2,130 mm | 77.6 in · 1,970 mm | +8% 10800 (DT) |
| Ground clearance declared | 16.1 in · 410 mm | 14.2 in · 360 mm | +14% 10800 (DT) |
| Fuel tank declared | 200.8 qt · 190.0 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Landini 10800 (DT) sources
- Source: Traktorenlexikon, “Landini 10800 DT”
Massey Ferguson MF 399 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 399”