- Vehicle type: unspecified
- WhichTractor size: Utility
- Lab tested ×1
- 2003–2008
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Claas Celtis 436 Full specifications
John Deere 4045 TRT 77. The manufacturer claimed 83 horsepower. The only laboratory test on record is of one version: OECD Test 2220 measured 71.3 hp at the PTO of the Celtis 436 (4 WD).
Engine power, claimed · gross or net not stated
83 hp
62 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Claas Celtis 436”, claimed
- Weight
- 8,289 lb
- Hyd. flow
- 18.2 gpm
- Top speed
- 24.9 mph
Claas Celtis 436 specs: key facts
The Claas Celtis 436 was built from 2003 to 2008.
Only one version of the Claas Celtis 436 has a laboratory test on record: the Celtis 436 (4 WD) produced 53.2 kW (71.3 hp) at the PTO, measured on OECD Test 2220.Source 1
The Claas Celtis 436 has a claimed engine power (gross or net not stated) of 62 kW (83 hp); it has no measured PTO figure.
The Claas Celtis 436 is four-wheel drive (4WD) (stated for 1 of its 2 configurations).Source 1
The Claas Celtis 436 weighs 3,760 kg (8,289 lb) unladen.
The Claas Celtis 436 has a rear PTO running at 540/1000 rpm.Source 1
The hydraulic pump of the Claas Celtis 436 delivers 69 L/min (18.2 gpm).
Source · Traktorenlexikon, “Claas Celtis 436”
How much horsepower does a Celtis 436 have?
The only laboratory test on record is of one version. OECD Test 2220 measured 71.3 hp at the PTO of the Celtis 436 (4 WD). For the Celtis 436 as a whole the figure is the 83 hp claimed for the engine, which is not power at the shaft.
Sources · Traktorenlexikon, “Claas Celtis 436”; OECD test report 2220, 2005
How much will a Celtis 436 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Celtis 436 are below.
| Pump flow | 18.2 gpm · 69 L/minSource 2 |
|---|---|
| Pressure | 2,611 psi · 180 barSource 2 |
| Rear PTO | 540/1000 rpm |
| PTO shaft | 34.9 mm, 6 splines / 34.9 mm, 21 splines |
Source · OECD test report 2220, 2005
What transmission does a Celtis 436 have?
Transmission specifications for the Celtis 436 are below.
| Top speed | 24.9 mph · 40 km/h |
|---|
Source · Traktorenlexikon, “Claas Celtis 436”
How much does a Celtis 436 weigh?
A Celtis 436 weighs 8,289 lb (3,760 kg) unladen.
| Unladen weight | 8,289 lb · 3,760 kg |
|---|---|
| Wheelbase | 98.0 in · 2,489 mm |
| Length | 152.4 in · 3,872 mm |
| Width | 98.8 in · 2,510 mm |
| Height | 104.5 in · 2,654 mm |
| Ground clearance | 16.5 in · 420 mm |
Source · Traktorenlexikon, “Claas Celtis 436”
How much fuel does a Celtis 436 burn per hour?
Measured on OECD Test 2220 (tested as the Celtis 436 (4 WD)), at each condition the laboratory recorded.
Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).
| Test condition | Fuel per hour |
|---|---|
| Maximum PTO powerPTO 53.2 kW (71.3 hp) at 589 rpm | 18.07 L/h 4.77 gal/h |
| Rated engine speedPTO 53.2 kW (71.3 hp) at 589 rpm | 18.07 L/h 4.77 gal/h |
| Standard PTO speedPTO 52.4 kW (70.3 hp) at 540 rpm | 17.62 L/h 4.65 gal/h |
| 75% load, 50% load | Not on record for this test |
Source · OECD Test 2220
Which tractors compare with a Celtis 436?
Within 10% of its 83 hp of claimed engine power, the same type, and first built within 15 years of it.
- Case-IH CX 8082.9 hp engine, claimed · 1998–2000Side by side with the Celtis 436 →
- ZETOR 8520/854082.9 hp engine, claimed · 1992–1999Side by side with the Celtis 436 →
- Deutz-Fahr Agroplus 41083.8 hp engine, claimed · from 2009Side by side with the Celtis 436 →
- Deutz-Fahr Agrofarm TB 41083.8 hp engine, claimed · from 2010Side by side with the Celtis 436 →
- AGRIFULL A-90 DL-Turbo83.8 hp engine, claimed · 1993–1995Side by side with the Celtis 436 →
- Fiat 85-90 Turbo (DT)83.8 hp engine, claimed · 1989–1992Side by side with the Celtis 436 →
Everything else people ask
Is a Celtis 436 two-wheel drive or four-wheel drive?
The Claas Celtis 436 is four-wheel drive (4WD) (stated for 1 of its 2 configurations).
What PTO does a Celtis 436 have?
A Celtis 436 has a 540/1000 rpm rear PTO on a 34.9 mm, 6 splines / 34.9 mm, 21 splines shaft.
Where this page comes from
Compiled from OECD tractor test report 2220; and Traktorenlexikon, “Claas Celtis 436”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 220: Claas Celtis 436 — Licence not stated by the publisher; facts cited, OECD-2220 · published 2005-02-18 · retrieved 2026-09-14. OECD; testing station Cemagref, Antony, France. Original document
- Traktorenlexikon: Claas Celtis 436 — CC BY-SA 4.0, WIKIBOOKS-TL-87210 · revision 1042405. Wikibooks contributors (Traktorenlexikon). Original document