- Vehicle type: unspecified
- WhichTractor size: Utility
- Lab tested ×1
- 2003–2008
WhichTractor size, not the maker’s category
We looked and the record does not say what this machine is. How we decide what a machine is
Claas Celtis 446 Full specifications
John Deere 4045 TRT 78. The manufacturer claimed 91 horsepower. The only laboratory test on record is of one version: OECD Test 2226 measured 81.0 hp at the PTO of the Celtis 446 (4 WD).
Engine power, claimed · gross or net not stated
91 hp
68 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Claas Celtis 446”, claimed
- Weight
- 8,356 lb
- Hyd. flow
- 18.2 gpm
- Top speed
- 24.9 mph
Claas Celtis 446 specs: key facts
The Claas Celtis 446 was built from 2003 to 2008.
Only one version of the Claas Celtis 446 has a laboratory test on record: the Celtis 446 (4 WD) produced 60.4 kW (81.0 hp) at the PTO, measured on OECD Test 2226.Source 1
The Claas Celtis 446 has a claimed engine power (gross or net not stated) of 68 kW (91 hp); it has no measured PTO figure.
The Claas Celtis 446 is four-wheel drive (4WD) (stated for 1 of its 2 configurations).Source 1
The Claas Celtis 446 weighs 3,790 kg (8,356 lb) unladen.
The Claas Celtis 446 has a rear PTO running at 540/1000 rpm.Source 1
The hydraulic pump of the Claas Celtis 446 delivers 69 L/min (18.2 gpm).
Source · Traktorenlexikon, “Claas Celtis 446”
How much horsepower does a Celtis 446 have?
The only laboratory test on record is of one version. OECD Test 2226 measured 81.0 hp at the PTO of the Celtis 446 (4 WD). For the Celtis 446 as a whole the figure is the 91 hp claimed for the engine, which is not power at the shaft.
Sources · Traktorenlexikon, “Claas Celtis 446”; OECD test report 2226, 2005
How much will a Celtis 446 lift, and what is its hydraulic flow?
Hydraulic and PTO specifications for the Celtis 446 are below.
| Pump flow | 18.2 gpm · 69 L/minSource 2 |
|---|---|
| Pressure | 2,611 psi · 180 barSource 2 |
| Rear PTO | 540/1000 rpm |
| PTO shaft | 34.9 mm, 6 splines / 34.9 mm, 21 splines |
Source · OECD test report 2226, 2005
What transmission does a Celtis 446 have?
Transmission specifications for the Celtis 446 are below.
| Top speed | 24.9 mph · 40 km/h |
|---|
Source · Traktorenlexikon, “Claas Celtis 446”
How much does a Celtis 446 weigh?
A Celtis 446 weighs 8,356 lb (3,790 kg) unladen.
| Unladen weight | 8,356 lb · 3,790 kg |
|---|---|
| Wheelbase | 98.0 in · 2,489 mm |
| Length | 155.8 in · 3,957 mm |
| Width | 98.8 in · 2,510 mm |
| Height | 104.5 in · 2,654 mm |
| Ground clearance | 16.5 in · 420 mm |
Source · Traktorenlexikon, “Claas Celtis 446”
How much fuel does a Celtis 446 burn per hour?
Measured on OECD Test 2226 (tested as the Celtis 446 (4 WD)), at each condition the laboratory recorded.
Cost per hour = fuel used per hour × your fuel price (per litre, or per US gallon for the gal/h figure).
| Test condition | Fuel per hour |
|---|---|
| Maximum PTO powerPTO 60.4 kW (81.0 hp) at 1,001 rpm | 19.17 L/h 5.06 gal/h |
| Rated engine speedPTO 56.3 kW (75.5 hp) at 1,086 rpm | 19.24 L/h 5.08 gal/h |
| Standard PTO speedPTO 60.4 kW (81.0 hp) at 1,001 rpm | 19.17 L/h 5.06 gal/h |
| 75% load, 50% load | Not on record for this test |
Source · OECD Test 2226
Which tractors compare with a Celtis 446?
Within 10% of its 91 hp of claimed engine power, the same type, and first built within 15 years of it.
- Deutz-Fahr Agrolux 9591 hp engine, claimed · from 2009Side by side with the Celtis 446 →
- Deutz-Fahr AgroStar 4.6890 hp engine, claimed · 1993–1995Side by side with the Celtis 446 →
- Hürlimann 95 XT89.7 hp engine, claimed · from 2004Side by side with the Celtis 446 →
- New Holland TLA 90 (A)89.7 hp engine, claimed · 2004–2008Side by side with the Celtis 446 →
- Case-IH CS-9492.7 hp engine, claimed · 1995–2003Side by side with the Celtis 446 →
- Case-IH 5220 (DT)92.7 hp engine, claimed · 1989–1997Side by side with the Celtis 446 →
Everything else people ask
Is a Celtis 446 two-wheel drive or four-wheel drive?
The Claas Celtis 446 is four-wheel drive (4WD) (stated for 1 of its 2 configurations).
What PTO does a Celtis 446 have?
A Celtis 446 has a 540/1000 rpm rear PTO on a 34.9 mm, 6 splines / 34.9 mm, 21 splines shaft.
Where this page comes from
Compiled from OECD tractor test report 2226; and Traktorenlexikon, “Claas Celtis 446”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- OECD Code 2 test report 2/2 226: Claas Celtis 446 — Licence not stated by the publisher; facts cited, OECD-2226 · published 2005-03-03 · retrieved 2026-09-14. OECD; testing station Cemagref, Antony, France. Original document
- Traktorenlexikon: Claas Celtis 446 — CC BY-SA 4.0, WIKIBOOKS-TL-87209 · revision 863749. Wikibooks contributors (Traktorenlexikon). Original document