WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1993–1996

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 4300 specs: hp, weight, years

VALMET 320 D three-cylinder diesel. The manufacturer claimed 60.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

60.2 hp

44.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 4300”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
6,151 lb
3-point lift
6,294 lb
Hyd. flow
10.3 gpm
Top speed
18.6 mph

VALMET 4300 specs: key facts

  • The VALMET 4300 was built from 1993 to 1996.

  • The VALMET 4300 has a claimed engine power (gross or net not stated) of 44.9 kW (60.2 hp); it has no measured PTO figure.

  • The VALMET 4300 was offered in two-wheel-drive and four-wheel-drive versions.

  • The VALMET 4300 has a VALMET 320 D engine, a 3-cylinder 3.30 L diesel unit.Source 1

  • The VALMET 4300 weighs 2,790 kg (6,151 lb) unladen.

  • The VALMET 4300 has an independent rear PTO running at 540E/540 rpm.

  • The three-point hitch of the VALMET 4300 lifts 2,855 kg (6,294 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 4300 delivers 39.0 L/min (10.3 gpm).

Source · Traktorenlexikon, “Valmet 4300”

Illustration of the 1993–1996 VALMET 4300, a 60 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 4300 have?

The only figure for the 4300 is 60.2 hp (44.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
60.2 hp

Source · Traktorenlexikon, “Valmet 4300”

What engine is in a 4300?

A 4300 has a VALMET 320 D, a 3-cylinder 3.30 L diesel engine.

Engine — 4300 engine specifications
Make & modelVALMET 320 D
Cylinders3, liquid-cooledSource 2
Displacement201.3 ci · 3.30 L
Max torque162 lb·ft · 220 N·m @ 1,450 rpmSource 2
Electrical system12 VSource 2

Source · Traktorenlexikon, “Valmet 255”

How much will a 4300 lift, and what is its hydraulic flow?

A 4300 lifts 6,294 lb (2,855 kg) at the lower-link ends of its Category 2 three-point hitch.

Hydraulics & PTO — 4300 hydraulics and PTO specifications
Pump flow10.3 gpm · 39.0 L/min
Pressure2,901 psi · 200 bar
Hitch categoryCategory 2
Lift at ends6,294 lb · 2,855 kg
Rear PTOIndependent, engine-driven, 540E/540 rpm @ 1,890 engine rpmEngages under load

Source · Traktorenlexikon, “Valmet 4300”

What transmission does a 4300 have?

Transmission specifications for the 4300 are below.

Transmission — 4300 transmission specifications
ClutchDry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch
SteeringHydrostatic steering
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Valmet 4300”

How much does a 4300 weigh?

A 4300 weighs 6,151 lb (2,790 kg) unladen.

Weights & dimensions — 4300 weights and dimensions
Unladen weight6,151 lb · 2,790 kgtwo-wheel-drive version
Wheelbase83.1 in · 2,112 mmtwo-wheel-drive version
Length149.2 in · 3,790 mm
Width80.0 in · 2,032 mm
Height94.1 in · 2,390 mm
Ground clearance18.1 in · 460 mmtwo-wheel-drive version
Front track52.6–60.5 in · 1,336–1,536 mmtwo-wheel-drive version
Rear track55.5–71.2 in · 1,409–1,809 mm
Turning radius, braked12.8 ft · 3.90 mtwo-wheel-drive version

Source · Traktorenlexikon, “Valmet 4300”

What oil does a 4300 take, and how much?

A 4300 engine takes 7.4 qt (7.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

4300 fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.4 qt · 7.0 LSource: Traktorenlexikon, “Valmet 4300” · single source, not independently verified
Transmission24.3 qt · 23.0 LSource: Traktorenlexikon, “Valmet 4300” · single source, not independently verified
Hydraulic37.0 qt · 35.0 LSource: Traktorenlexikon, “Valmet 4300” · single source, not independently verified
Front axle6.9 qt · 6.5 LSource: Traktorenlexikon, “Valmet 4300” · single source, not independently verified
Cooling system9.0 qt · 8.5 LSource: Traktorenlexikon, “Valmet 4300” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 4300?

Within 10% of its 60.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the VALMET 4300

Is a 4300 two-wheel drive or four-wheel drive?

The VALMET 4300 was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 4300 have?

A 4300 has a independent 540E/540 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Valmet 255”; and Traktorenlexikon, “Valmet 4300”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 255 — CC BY-SA 4.0, WIKIBOOKS-TL-116421 · revision 998402. Wikibooks contributors (Traktorenlexikon). Original document
  2. Traktorenlexikon: Valmet 4300 — CC BY-SA 4.0, WIKIBOOKS-TL-116447 · revision 998945. Wikibooks contributors (Traktorenlexikon). Original document