10 material differences · fewer than 12

Tractor oneVALMET 355 (355/4)1990–1994No measured PTO figureTractor twoVALMET 43001993–1996No measured PTO figure

Which should you choose?

Read our verdict on the 355 (355/4) and the 4300 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 6 fields identical or within 5%, which is not counted as material

VALMET 355 (355/4) and VALMET 4300, field by field
Field	355 (355/4)	4300	Gap
Engine
Engine power, claimed claimed	60.2 hp	60.2 hp	—
Engine declared	VALMET TD-33 D 3 or 320 D	VALMET 320 D	differs
Displacement declared	3.30 L	3.30 L	—
Maximum torque declared	146 lb·ft · 198 N·m	162 lb·ft · 220 N·m	+11% 4300
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6 mph · 30 km/h	+20% 4300
Clutch declared	—	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	—
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	8.2 gpm · 31.0 L/min	10.3 gpm · 39.0 L/min	+26% 4300
Pressure declared	4,206 psi · 290 bar	2,901 psi · 200 bar	+45% 355 (355/4)
Rear PTO speeds declared	540 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,886 lb · 2,670 kg	6,151 lb · 2,790 kg	—
Wheelbase declared	83.1 in · 2,112 mm	83.1 in · 2,112 mm	—
Length declared	146.1 in · 3,710 mm	149.2 in · 3,790 mm	—
Width declared	77.4–97.8 in · 1,965–2,485 mm	80.0 in · 2,032 mm	differs
Height, over the cab declared	96.9 in · 2,460 mm	94.1 in · 2,390 mm	—
Ground clearance declared	15.9 in · 405 mm	18.1 in · 460 mm	+14% 4300
Turning radius, braked declared	10.2 ft · 3.10 m	12.8 ft · 3.90 m	+26% 4300
Fuel tank declared	77.1 qt · 73.0 L	100.4 qt · 95.0 L	+30% 4300

Source

Source