7 material differences · fewer than 12
Tractor oneVALMET 405 (405/4)1985–1989No measured PTO figureTractor twoVALMET 43001993–1996No measured PTO figure
Which should you choose?
Read our verdict on the 405 (405/4) and the 4300 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 405 (405/4) | 4300 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 60.2 hp | 60.2 hp | — |
| Engine declared | VALMET TD-27 DS 4 | VALMET 320 D | differs |
| Displacement declared | 2.69 L | 3.30 L | +23% 4300 |
| Maximum torque declared | 149 lb·ft · 202 N·m | 162 lb·ft · 220 N·m | +9% 4300 |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6 mph · 30 km/h | — |
| Clutch declared | — | Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.7 gpm · 36.6 L/min | 10.3 gpm · 39.0 L/min | +7% 4300 |
| Pressure declared | — | 2,901 psi · 200 bar | — |
| Rear PTO speeds declared | 540 rpm | 540E/540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,975 lb · 2,710 kg | 6,151 lb · 2,790 kg | — |
| Wheelbase declared | 83.1 in · 2,112 mm | 83.1 in · 2,112 mm | — |
| Length declared | 146.1 in · 3,710 mm | 149.2 in · 3,790 mm | — |
| Width declared | 76.3 in · 1,938 mm | 80.0 in · 2,032 mm | — |
| Ground clearance declared | 19.9 in · 505 mm | 18.1 in · 460 mm | +10% 405 (405/4) |
| Turning radius, braked declared | — | 12.8 ft · 3.90 m | — |
| Fuel tank declared | 77.1 qt · 73.0 L | 100.4 qt · 95.0 L | +30% 4300 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
VALMET 405 (405/4) sources
- Source: Traktorenlexikon, “Valmet 405”
VALMET 4300 sources
- Source: Traktorenlexikon, “Valmet 4300”
- Source: Traktorenlexikon, “Valmet 255”