- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1994–1997
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 365 (365-4) Full specifications
VALMET 320 D three-cylinder diesel. The manufacturer claimed 60.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
60.2 hp
44.9 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 365”, claimed
- Weight
- 6,217 lb
- 3-point lift
- 5,688 lb
- Hyd. flow
- 14.5 gpm
- Top speed
- 18.6–24.9 mph
VALMET 365 (365-4) specs: key facts
The VALMET 365 (365-4) was built from 1994 to 1997.
The VALMET 365 (365-4) has a claimed engine power (gross or net not stated) of 44.9 kW (60.2 hp); it has no measured PTO figure.
The VALMET 365 (365-4) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The VALMET 365 (365-4) has a VALMET 320 D engine, a 3-cylinder 3.30 L diesel unit.Source 1
The VALMET 365 (365-4) weighs 2,820 kg (6,217 lb) unladen.
The VALMET 365 (365-4) has an independent rear PTO running at 540E/540 rpm.
The three-point hitch of the VALMET 365 (365-4) lifts 2,580 kg (5,688 lb) at the lower-link ends.
The hydraulic pump of the VALMET 365 (365-4) delivers 55.0 L/min (14.5 gpm).
Source · Traktorenlexikon, “Valmet 365”
How much horsepower does a 365 (365-4) have?
The only figure for the 365 (365-4) is 60.2 hp (44.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 365”
What engine is in a 365 (365-4)?
A 365 (365-4) has a VALMET 320 D, a 3-cylinder 3.30 L diesel engine.
| Make & model | VALMET 320 D |
|---|---|
| Cylinders | 3, liquid-cooledSource 2 |
| Displacement | 201.3 ci · 3.30 L |
| Max torque | 162 lb·ft · 220 N·m @ 1,400 rpmSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Valmet 255”
How much will a 365 (365-4) lift, and what is its hydraulic flow?
A 365 (365-4) lifts 5,688 lb (2,580 kg) at the lower-link ends of its Category 2 three-point hitch.
| System | Open centre |
|---|---|
| Pump flow | 14.5 gpm · 55.0 L/min |
| Pressure | 2,901 psi · 200 bar |
| Hitch category | Category 2 |
| Lift at ends | 5,688 lb · 2,580 kg |
| Rear PTO | Independent, engine-driven, 540E/540 rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 part |
Source · Traktorenlexikon, “Valmet 365”
What transmission does a 365 (365-4) have?
Transmission specifications for the 365 (365-4) are below.
| Clutch | Dry FICHTEL & SACHS double clutch |
|---|---|
| Brakes | Pedal-operated wet GIRLING multi-disc brake acting on differential side shafts |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Valmet 365”
How much does a 365 (365-4) weigh?
A 365 (365-4) weighs 6,217 lb (2,820 kg) unladen.
| Unladen weight | 6,217 lb · 2,820 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 83.1 in · 2,112 mmtwo-wheel-drive version |
| Length | 146.1 in · 3,710 mmtwo-wheel-drive version |
| Width | 79.9 in · 2,030 mm |
| Height | 103.5 in · 2,630 mm |
| Ground clearance | 15.9 in · 405 mm |
| Front track | 56.8–64.6 in · 1,442–1,642 mmtwo-wheel-drive version |
| Rear track | 58.7–66.8 in · 1,490–1,696 mmtwo-wheel-drive version |
| Turning radius, braked | 11.5 ft · 3.50 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Valmet 365”
Which tractors compare with a 365 (365-4)?
Within 10% of its 49.6 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- VALMET 430049.6 hp PTO, claimed · 1993–1996Side by side with the 365 (365-4) →
- John Deere 1140 (A)49.6 hp PTO, claimed · 1979–1986Side by side with the 365 (365-4) →
- John Deere 510349.8 hp PTO, measured · 2003–2008Side by side with the 365 (365-4) →
- Lamborghini 564-60 (DT)49.9 hp PTO, claimed · 1993–2004Side by side with the 365 (365-4) →
- SAME Argon 60 (DT)49.9 hp PTO, claimed · 1993–2004Side by side with the 365 (365-4) →
- Hürlimann H-361 (A)49.9 hp PTO, claimed · 1986–1997Side by side with the 365 (365-4) →
Everything else people ask
Is a 365 (365-4) two-wheel drive or four-wheel drive?
The VALMET 365 (365-4) was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 365 (365-4) have?
A 365 (365-4) has a independent 540E/540 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 part shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 255”; and Traktorenlexikon, “Valmet 365”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 255 — CC BY-SA 4.0, WIKIBOOKS-TL-116421 · revision 998402. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Valmet 365 — CC BY-SA 4.0, WIKIBOOKS-TL-116424 · revision 998407. Wikibooks contributors (Traktorenlexikon). Original document