- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1990–1999
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Ford 4630 (A) specs: hp, weight, years
Ford D 201 CID-NA three-cylinder diesel. The manufacturer claimed 60.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
60.2 hp
44.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Ford 4630”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 6,151 lb
- 3-point lift
- 4,381 lb
- Hyd. flow
- 7.8 gpm
- Top speed
- 18.6–24.9 mph
Ford 4630 (A) specs: key facts
The Ford 4630 (A) was built from 1990 to 1999.
The Ford 4630 (A) has a claimed engine power (gross or net not stated) of 44.9 kW (60.2 hp); it has no measured PTO figure.
The Ford 4630 (A) was offered in two-wheel-drive and four-wheel-drive versions.
The Ford 4630 (A) has a Ford D 201 CID-NA engine, a 3-cylinder 3.29 L diesel unit.
The Ford 4630 (A) weighs 2,790 kg (6,151 lb) unladen.
The Ford 4630 (A) has an independent rear PTO running at 540 rpm.
The three-point hitch of the Ford 4630 (A) lifts 1,987 kg (4,381 lb) at the lower-link ends.
The hydraulic pump of the Ford 4630 (A) delivers 29.5 L/min (7.8 gpm).
Source · Traktorenlexikon, “Ford 4630”

How much horsepower does a 4630 (A) have?
The only figure for the 4630 (A) is 60.2 hp (44.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Ford 4630”
What engine is in a 4630 (A)?
A 4630 (A) has a Ford D 201 CID-NA, a 3-cylinder 3.29 L diesel engine.
| Make & model | Ford D 201 CID-NA |
|---|---|
| Cylinders | 3, liquid-cooled |
| Displacement | 201.0 ci · 3.29 L |
| Max torque | 162 lb·ft · 220 N·m @ 1,267 rpm |
| Injection | Direct injection |
Source · Traktorenlexikon, “Ford 4630”
How much will a 4630 (A) lift, and what is its hydraulic flow?
A 4630 (A) lifts 4,381 lb (1,987 kg) at the lower-link ends of its Category 2 three-point hitch.
| System | Open centre |
|---|---|
| Pump flow | 7.8 gpm · 29.5 L/min |
| Pressure | 2,857 psi · 197 bar |
| Hitch category | Category 2 |
| Lift at ends | 4,381 lb · 1,987 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,756 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Ford 4630”
What transmission does a 4630 (A) have?
Transmission specifications for the 4630 (A) are below.
| Clutch | Pedal-operated dry AP single-disc clutch |
|---|---|
| Steering | Hydrostatic Ford-New Holland steering with double-acting steering cylinder |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Ford 4630”
How much does a 4630 (A) weigh?
A 4630 (A) weighs 6,151 lb (2,790 kg) unladen.
| Unladen weight | 6,151 lb · 2,790 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 84.5 in · 2,146 mmtwo-wheel-drive version |
| Length | 138.6 in · 3,521 mmtwo-wheel-drive version |
| Width | 68.3–96.7 in · 1,735–2,457 mm |
| Height | 97.8 in · 2,485 mm |
| Ground clearance | 14.8 in · 375 mmtwo-wheel-drive version |
| Front track | 52.8–79.6 in · 1,341–2,023 mm1,319-1,926 |
| Rear track | 59.6–79.8 in · 1,515–2,028 mm |
Source · Traktorenlexikon, “Ford 4630”
What oil does a 4630 (A) take, and how much?
A 4630 (A) engine takes 7.0 qt (6.6 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 7.0 qt · 6.6 LSource: Traktorenlexikon, “Ford 4630” · single source, not independently verified |
| Transmission | 8.9 qt · 8.4 LSource: Traktorenlexikon, “Ford 4630” · single source, not independently verified |
| Hydraulic | 35.8 qt · 33.9 LSource: Traktorenlexikon, “Ford 4630” · single source, not independently verified |
| Front axle | 5.8 qt · 5.5 LSource: Traktorenlexikon, “Ford 4630” · single source, not independently verified |
| Cooling system | 11.0 qt · 10.4 LSource: Traktorenlexikon, “Ford 4630” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 4630 (A)?
Within 10% of its 60.2 hp of claimed engine power, the same type, and first built within 15 years of it.
- VALMET 355 (355/4)60.2 hp engine, claimed · 1990–1994Side by side with the 4630 (A) →
- VALMET 430060.2 hp engine, claimed · 1993–1996Side by side with the 4630 (A) →
- ZETOR 4320/434060.2 hp engine, claimed · 1993–1997Side by side with the 4630 (A) →
- VALMET 365 (365-4)60.2 hp engine, claimed · 1994–1997Side by side with the 4630 (A) →
- VALMET 405 (405/4)60.2 hp engine, claimed · 1985–1989Side by side with the 4630 (A) →
- VOLVO-BM-VALMET 405 (405/4)60.2 hp engine, claimed · 1985Side by side with the 4630 (A) →
Common questions about the Ford 4630 (A)
Is a 4630 (A) two-wheel drive or four-wheel drive?
The Ford 4630 (A) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 4630 (A) have?
A 4630 (A) has a independent 540 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Ford 4630”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Ford 4630 — CC BY-SA 4.0, WIKIBOOKS-TL-91323 · revision 919079. Wikibooks contributors (Traktorenlexikon). Original document