10 material differences · fewer than 12

Tractor oneFord 4630 (A)1990–1999No measured PTO figureTractor twoVALMET 43001993–1996No measured PTO figure

Which should you choose?

Read our verdict on the 4630 (A) and the 4300 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

10 material differences · 7 fields identical or within 5%, which is not counted as material

Ford 4630 (A) and VALMET 4300, field by field
Field	4630 (A)	4300	Gap
Engine
Engine power, claimed claimed	60.2 hp	60.2 hp	—
Engine declared	Ford D 201 CID-NA	VALMET 320 D	differs
Displacement declared	3.29 L	3.30 L	—
Maximum torque declared	162 lb·ft · 220 N·m	162 lb·ft · 220 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6 mph · 30 km/h	differs
Clutch declared	Pedal-operated dry AP single-disc clutch	Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	7.8 gpm · 29.5 L/min	10.3 gpm · 39.0 L/min	+32% 4300
Pressure declared	2,857 psi · 197 bar	2,901 psi · 200 bar	—
Three-point lift, at the coupling points declared	4,381 lb · 1,987 kg	6,294 lb · 2,855 kg	+44% 4300
Rear PTO speeds declared	540 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	6,151 lb · 2,790 kg	6,151 lb · 2,790 kg	—
Wheelbase declared	84.5 in · 2,146 mm	83.1 in · 2,112 mm	—
Length declared	138.6 in · 3,521 mm	149.2 in · 3,790 mm	+8% 4300
Width declared	68.3–96.7 in · 1,735–2,457 mm	80.0 in · 2,032 mm	differs
Height, over the cab declared	97.8 in · 2,485 mm	94.1 in · 2,390 mm	—
Ground clearance declared	14.8 in · 375 mm	18.1 in · 460 mm	+23% 4300
Turning radius, braked declared	—	12.8 ft · 3.90 m	—
Fuel tank declared	69.4 qt · 65.7 L	100.4 qt · 95.0 L	+45% 4300

Source

Source