- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1993–1996
WhichTractor size, not the maker’s category
VALMET 4300 Hydraulics & PTO specs
12 hydraulics and PTO values on record for the 4300.
Engine power, claimed · gross or net not stated
60.2 hp
44.9 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 4300”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
How much will a 4300 lift?
A 4300 lifts 6,294 lb (2,855 kg) at the lower-link ends.
| Pump flow | 10.3 gpm · 39.0 L/min |
|---|---|
| Steering pump flow | 3.3 gpm · 12.5 L/min |
| Hydraulic pressure | 2,901 psi · 200 bar |
| Rear remote valves | 2 |
| Three-point hitch category | Category 2 |
| Lift capacity at ball ends | 6,294 lb · 2,855 kg |
| Hitch control | Lifting, lowering, floating position, position, mixed, position and draft control |
Source · Traktorenlexikon, “Valmet 4300”
What PTO does a 4300 have?
A 4300 has a 540E/540 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540E/540 rpm |
| Engine speed at 540 PTO | 1,890 rpm |
Source · Traktorenlexikon, “Valmet 4300”
Sources and how this page was built
12 hydraulics and PTO values from Traktorenlexikon, “Valmet 4300”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 4300 — CC BY-SA 4.0, WIKIBOOKS-TL-116447 · revision 998945. Wikibooks contributors (Traktorenlexikon). Original document