WhichTractor
  • Rigid chassis
  • WhichTractor size: Utility
  • No lab test on file
  • 1985–1989

WhichTractor size, not the maker’s category

Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is

VALMET 405 (405/4) specs: hp, weight, years

VALMET TD-27 DS 4 three-cylinder diesel. The manufacturer claimed 60.2 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.

Engine power, claimed · gross or net not stated

60.2 hp

44.9 kW as stated by the source

No lab test on file

Claimed · standard not stated by the source

Source · Traktorenlexikon, “Valmet 405”, claimed

This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.

Weight
5,975 lb
3-point lift
3,979 lb
Hyd. flow
9.7 gpm
Top speed
18.6 mph

VALMET 405 (405/4) specs: key facts

  • The VALMET 405 (405/4) was built from 1985 to 1989.

  • The VALMET 405 (405/4) has a claimed engine power (gross or net not stated) of 44.9 kW (60.2 hp); it has no measured PTO figure.

  • The VALMET 405 (405/4) was offered in two-wheel-drive and four-wheel-drive versions.

  • The VALMET 405 (405/4) has a VALMET TD-27 DS 4 engine, a 3-cylinder 2.69 L diesel unit.

  • The VALMET 405 (405/4) weighs 2,710 kg (5,975 lb) unladen.

  • The VALMET 405 (405/4) has an independent rear PTO running at 540 rpm.

  • The three-point hitch of the VALMET 405 (405/4) lifts 1,805 kg (3,979 lb) at the lower-link ends.

  • The hydraulic pump of the VALMET 405 (405/4) delivers 36.6 L/min (9.7 gpm).

Source · Traktorenlexikon, “Valmet 405”

Illustration of the 1985–1989 VALMET 405 (405/4), a 60 hp farm tractor, four-wheel-drive version, a drawing generated from its specification record
Illustration — not a photograph · four-wheel-drive version

How much horsepower does a 405 (405/4) have?

The only figure for the 405 (405/4) is 60.2 hp (44.9 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.

Engine, claimed (gross/net not stated)
60.2 hp

Source · Traktorenlexikon, “Valmet 405”

What engine is in a 405 (405/4)?

A 405 (405/4) has a VALMET TD-27 DS 4, a 3-cylinder 2.69 L diesel engine.

Engine — 405 (405/4) engine specifications
Make & modelVALMET TD-27 DS 4
Cylinders3, liquid-cooled
Displacement163.9 ci · 2.69 L
Max torque149 lb·ft · 202 N·m @ 1,410 rpm
Electrical system12 V

Source · Traktorenlexikon, “Valmet 405”

How much will a 405 (405/4) lift, and what is its hydraulic flow?

A 405 (405/4) lifts 3,979 lb (1,805 kg) at the lower-link ends.

Hydraulics & PTO — 405 (405/4) hydraulics and PTO specifications
Pump flow9.7 gpm · 36.6 L/min
Lift at ends3,979 lb · 1,805 kg
Rear PTOIndependent, engine-driven, 540 rpm @ 1,890 engine rpm

Source · Traktorenlexikon, “Valmet 405”

What transmission does a 405 (405/4) have?

Transmission specifications for the 405 (405/4) are below.

Transmission — 405 (405/4) transmission specifications
Top speed18.6 mph · 30 km/h

Source · Traktorenlexikon, “Valmet 405”

How much does a 405 (405/4) weigh?

A 405 (405/4) weighs 5,975 lb (2,710 kg) unladen.

Weights & dimensions — 405 (405/4) weights and dimensions
Unladen weight5,975 lb · 2,710 kgtwo-wheel-drive version
Wheelbase83.1 in · 2,112 mmtwo-wheel-drive version
Length146.1 in · 3,710 mmtwo-wheel-drive version
Width76.3 in · 1,938 mm
Height103.0 in · 2,615 mmtwo-wheel-drive version
Ground clearance19.9 in · 505 mmtwo-wheel-drive version
Front track58.9–66.8 in · 1,496–1,696 mmtwo-wheel-drive version
Rear track59.4–67.0 in · 1,509–1,703 mmtwo-wheel-drive version

Source · Traktorenlexikon, “Valmet 405”

What oil does a 405 (405/4) take, and how much?

A 405 (405/4) engine takes 7.4 qt (7.0 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.

405 (405/4) fluid capacities, grades and service intervals
SystemCapacity
Engine oil7.4 qt · 7.0 LSource: Traktorenlexikon, “Valmet 405” · single source, not independently verified
Transmission24.3 qt · 23.0 LSource: Traktorenlexikon, “Valmet 405” · single source, not independently verified
Hydraulic37.0 qt · 35.0 LSource: Traktorenlexikon, “Valmet 405” · single source, not independently verified
Front axle4.8 qt · 4.5 LSource: Traktorenlexikon, “Valmet 405” · single source, not independently verified
Cooling system10.6 qt · 10.0 LSource: Traktorenlexikon, “Valmet 405” · single source, not independently verified

Always confirm against the operator’s manual for your machine before service.

Which tractors compare with a 405 (405/4)?

Within 10% of its 60.2 hp of claimed engine power, the same type, and first built within 15 years of it.

Common questions about the VALMET 405 (405/4)

Is a 405 (405/4) two-wheel drive or four-wheel drive?

The VALMET 405 (405/4) was offered in two-wheel-drive and four-wheel-drive versions.

What PTO does a 405 (405/4) have?

A 405 (405/4) has a independent 540 rpm rear PTO.

Sources and how this page was built

Compiled from Traktorenlexikon, “Valmet 405”.

Sources checked

14 SEP 2026

Spotted an error?

Sources

Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution

  1. Traktorenlexikon: Valmet 405 — CC BY-SA 4.0, WIKIBOOKS-TL-116305 · revision 1023841. Wikibooks contributors (Traktorenlexikon). Original document