- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1990–1993
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
CASE-INTERNATIONAL 695 (DT) Full specifications
IHC D-239 four-cylinder diesel. The manufacturer claimed 72.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
72.0 hp
53.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 695”, claimed
- Weight
- 6,832 lb
- 3-point lift
- 5,351 lb
- Top speed
- 21.7 mph
CASE-INTERNATIONAL 695 (DT) specs: key facts
The CASE-INTERNATIONAL 695 (DT) was built from 1990 to 1993.
The CASE-INTERNATIONAL 695 (DT) has a claimed engine power (gross or net not stated) of 53.7 kW (72.0 hp); it has no measured PTO figure.
The CASE-INTERNATIONAL 695 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
The CASE-INTERNATIONAL 695 (DT) has a IHC D-239 engine, a 4-cylinder 3.91 L diesel unit.Source 1
The CASE-INTERNATIONAL 695 (DT) weighs 3,099 kg (6,832 lb) unladen.
The CASE-INTERNATIONAL 695 (DT) has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the CASE-INTERNATIONAL 695 (DT) lifts 2,427 kg (5,351 lb) at the lower-link ends.
Source · Traktorenlexikon, “Case-IH 695”
How much horsepower does a 695 (DT) have?
The only figure for the 695 (DT) is 72.0 hp (53.7 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Case-IH 695”
What engine is in a 695 (DT)?
A 695 (DT) has an IHC D-239, a 4-cylinder 3.91 L diesel engine.
| Make & model | IHC D-239Source 1 |
|---|---|
| Cylinders | 4, liquid-cooledSource 1 |
| Displacement | 238.5 ci · 3.91 LSource 1 |
| Max torque | 163 lb·ft · 221 N·m @ 1,240 rpm |
| Injection | Direct injection |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Case-IH 695”
How much will a 695 (DT) lift?
A 695 (DT) lifts 5,351 lb (2,427 kg) at the lower-link ends.
| Pressure | 2,698 psi · 186 bar |
|---|---|
| Lift at ends | 5,351 lb · 2,427 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm @ 2,141 engine rpmEngages under load |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 piece |
Source · Traktorenlexikon, “Case-IH 695”
What transmission does a 695 (DT) have?
Transmission specifications for the 695 (DT) are below.
| Clutch | Pedal-operated dry Rockford single-plate clutch designed as driving clutch |
|---|---|
| Steering | Hydrostatic Danfoss steering, type: OSPC 100 OR with double-acting Carraro steering cylinder |
| Top speed | 21.7 mph · 35 km/h |
Source · Traktorenlexikon, “Case-IH 695”
How much does a 695 (DT) weigh?
A 695 (DT) weighs 6,832 lb (3,099 kg) unladen.
| Unladen weight | 6,832 lb · 3,099 kgDT: 3,319 |
|---|---|
| Wheelbase | 88.0 in · 2,235 mm |
| Length | 151.4 in · 3,845 mm |
| Width | 73.0 in · 1,854 mm |
| Height | 105.1 in · 2,670 mm |
| Front track | 54.0–79.0 in · 1,372–2,007 mmDT: 1,364-1,824 |
| Rear track | 56.1–75.8 in · 1,425–1,925 mm |
Source · Traktorenlexikon, “Case-IH 695”
Which tractors compare with a 695 (DT)?
Within 10% of its 72.0 hp of claimed engine power, the same type, and first built within 15 years of it.
- ZETOR 6320/634072.0 hp engine, claimed · 1993–2007Side by side with the 695 (DT) →
- SAME Centurion 75 (DT)72.0 hp engine, claimed · 1978–1985Side by side with the 695 (DT) →
- DEUTZ-ALLIS 627573.0 hp engine, claimed · 1986–1990Side by side with the 695 (DT) →
- Steyr 8085 a RS-271 hp engine, claimed · 1988–1993Side by side with the 695 (DT) →
- Landini 7830 (DT) TL-20 N/F (TL-20 DT/F)71 hp engine, claimed · 1983–1987Side by side with the 695 (DT) →
- Ford 561071 hp engine, claimed · 1981–1991Side by side with the 695 (DT) →
Everything else people ask
Is a 695 (DT) two-wheel drive or four-wheel drive?
The CASE-INTERNATIONAL 695 (DT) was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 695 (DT) have?
A 695 (DT) has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 piece shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Case-IH 695”; and Traktorenlexikon, “Case-IH 4210”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 4210 — CC BY-SA 4.0, WIKIBOOKS-TL-27259 · revision 975658. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Case-IH 695 — CC BY-SA 4.0, WIKIBOOKS-TL-115485 · revision 1070432. Wikibooks contributors (Traktorenlexikon). Original document