5 material differences · fewer than 12
Tractor oneCASE-INTERNATIONAL 695 (DT)1990–1993No measured PTO figureTractor twoZETOR 7711/77451985–1993No measured PTO figure
Which should you choose?
Read our verdict on the 695 (DT) and the 7711/7745 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
5 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 695 (DT) | 7711/7745 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 72.0 hp | 72.0 hp | — |
| Engine declared | IHC D-239 | ZBROJORKA Z-7701 | differs |
| Displacement declared | 3.91 L | 3.92 L | — |
| Maximum torque declared | 163 lb·ft · 221 N·m | 182 lb·ft · 247 N·m | +12% 7711/7745 |
| Transmission | |||
| Top speed declared | 21.7 mph · 35 km/h | 15.5 mph · 25 km/h | +40% 695 (DT) |
| Clutch declared | Pedal-operated dry Rockford single-plate clutch designed as driving clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 9.7 gpm · 36.9 L/min | — |
| Pressure declared | 2,698 psi · 186 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,832 lb · 3,099 kg | 6,841 lb · 3,103 kg | — |
| Wheelbase declared | 88.0 in · 2,235 mm | 88.9 in · 2,257 mm | — |
| Length declared | 151.4 in · 3,845 mm | 148.0 in · 3,760 mm | — |
| Width declared | 73.0–92.7 in · 1,854–2,354 mm | 72.4–87.8 in · 1,840–2,230 mm | differs |
| Height, over the cab declared | 105.1 in · 2,670 mm | 102.8 in · 2,610 mm | — |
| Ground clearance declared | — | 19.3 in · 490 mm | — |
| Turning radius, braked declared | — | 11.5 ft · 3.51 m | — |
| Fuel tank declared | 118.3 qt · 112.0 L | 74.0 qt · 70.0 L | +60% 695 (DT) |
CASE-INTERNATIONAL 695 (DT) sources
Source
- Source: Traktorenlexikon, “Case-IH 695”
- Source: Traktorenlexikon, “Case-IH 4210”
ZETOR 7711/7745 sources
Source
- Source: Traktorenlexikon, “Zetor 7711”