WhichTractor

6 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 695 (DT)1990–1993No measured PTO figureTractor twoSAME Centurion 75 (DT)1978–1985No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the Centurion 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

Field by field

6 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and SAME Centurion 75 (DT), field by field
Field695 (DT)Centurion 75 (DT)Gap
Engine
Engine power, claimed claimed72.0 hp72.0 hp—
Engine declaredIHC D-239SAME DA 1054 Pdiffers
Displacement declared3.91 L4.15 L+6% Centurion 75 (DT)
Maximum torque declared163 lb·ft · 221 N·m——
Transmission
Top speed declared21.7 mph · 35 km/h15.5–18.6 mph · 25–30 km/hdiffers
Clutch declaredPedal-operated dry Rockford single-plate clutch designed as driving clutch——
Hydraulics & hitch
Pump flow declared—5.8 gpm · 22.0 L/min—
Pressure declared2,698 psi · 186 bar2,973 psi · 205 bar+10% Centurion 75 (DT)
Rear PTO speeds declared540/1000 rpm540/1000 rpm—
Weight & dimensions
Unladen weight declared6,832 lb · 3,099 kg7,209 lb · 3,270 kg+6% Centurion 75 (DT)
Wheelbase declared88.0 in · 2,235 mm91.3 in · 2,320 mm—
Length declared151.4 in · 3,845 mm151.2 in · 3,840 mm—
Width declared73.0–92.7 in · 1,854–2,354 mm76.0–95.7 in · 1,930–2,430 mm—
Height, over the cab declared105.1 in · 2,670 mm109.4 in · 2,780 mm—
Ground clearance declared—20.9 in · 530 mm—
Turning radius, braked declared—11.5 ft · 3.50 m—
Fuel tank declared118.3 qt · 112.0 L126.8 qt · 120.0 L+7% Centurion 75 (DT)

CASE-INTERNATIONAL 695 (DT) sources

Source
  • Source: Traktorenlexikon, “Case-IH 695”
  • Source: Traktorenlexikon, “Case-IH 4210”

SAME Centurion 75 (DT) sources

Source
  • Source: Traktorenlexikon, “SAME Centurion 75”
  • Source: Traktorenlexikon, “SAME Leopard 85”