- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1990–1993
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
CASE-INTERNATIONAL 695 (DT) Hydraulics & PTO specifications
11 hydraulics and PTO values on record for the 695 (DT).
Engine power, claimed · gross or net not stated
72.0 hp
53.7 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Case-IH 695”, claimed
How much will a 695 (DT) lift?
A 695 (DT) lifts 5,351 lb (2,427 kg) at the lower-link ends.
| Steering pump flow | 2.5 gpm · 9.5 L/min |
|---|---|
| Hydraulic pressure | 2,698 psi · 186 bar |
| Lift capacity at ball ends | 5,351 lb · 2,427 kg |
| Hitch control | Lifting, lowering, position, draft and mixed control |
Source · Traktorenlexikon, “Case-IH 695”
What PTO does a 695 (DT) have?
A 695 (DT) has a 540/1000 rpm rear PTO.
| Rear PTO drive | Engine-driven |
|---|---|
| Rear PTO independence | Independent |
| PTO engages under load | Yes |
| Rear PTO speeds | 540/1000 rpm |
| Engine speed at 540 PTO | 2,141 rpm |
| Rear PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 piece |
| Front PTO available, optional | Yes |
Source · Traktorenlexikon, “Case-IH 695”
Where this page comes from
11 hydraulics and PTO values from Traktorenlexikon, “Case-IH 695”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Case-IH 695 — CC BY-SA 4.0, WIKIBOOKS-TL-115485 · revision 1070432. Wikibooks contributors (Traktorenlexikon). Original document