CASE-INTERNATIONAL 695 (DT) vs DEUTZ-ALLIS 6275

9 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the 6275 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and DEUTZ-ALLIS 6275, field by field
Field	695 (DT)	6275	Gap
Engine
Engine power, claimed claimed	72.0 hp	73.0 hp	—
Engine declared	IHC D-239	KHD F4L 913	differs
Displacement declared	3.91 L	4.09 L	—
Maximum torque declared	163 lb·ft · 221 N·m	187 lb·ft · 254 N·m	+15% 6275
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6 mph · 30 km/h	+17% 695 (DT)
Clutch declared	Pedal-operated dry Rockford single-plate clutch designed as driving clutch	Independent dry double clutch	differs
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	—	11.4 gpm · 43.1 L/min	—
Pressure declared	2,698 psi · 186 bar	3,481 psi · 240 bar	+29% 6275
Three-point lift at ends declared	5,351 lb · 2,427 kg	7,273 lb · 3,299 kg	+36% 6275
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	7,826 lb · 3,550 kg	+15% 6275
Wheelbase declared	88.0 in · 2,235 mm	91.6 in · 2,327 mm	—
Length declared	151.4 in · 3,845 mm	155.5 in · 3,950 mm	—
Width declared	73.0 in · 1,854 mm	82.3 in · 2,090 mm	+13% 6275
Height declared	105.1 in · 2,670 mm	101.3 in · 2,573 mm	—
Ground clearance declared	—	18.0 in · 457 mm	—
Fuel tank declared	118.3 qt · 112.0 L	91.9 qt · 87.0 L	+29% 695 (DT)

Source

Source