CASE-INTERNATIONAL 695 (DT) vs ZETOR 6320/6340

7 material differences · fewer than 12

Tractor one

1990–1993

No measured PTO figure

Tractor two

1993–2007

No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the 6320/6340 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 7 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and ZETOR 6320/6340, field by field
Field	695 (DT)	6320/6340	Gap
Engine
Engine power, claimed claimed	72.0 hp	72.0 hp	—
Engine declared	IHC D-239	ZBROJORKA Z-7701	differs
Displacement declared	3.91 L	3.92 L	—
Maximum torque declared	163 lb·ft · 221 N·m	182 lb·ft · 247 N·m	+12% 6320/6340
Transmission
Top speed declared	21.7 mph · 35 km/h	15.5–18.6 mph · 25–30 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch designed as driving clutch	Dry Zbrojovka double clutch, pedal-operated driving clutch and pneumatically-operated PTO clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	—	10.6 gpm · 40.2 L/min	—
Pressure declared	2,698 psi · 186 bar	—	—
Three-point lift at ends declared	5,351 lb · 2,427 kg	8,880 lb · 4,028 kg	+66% 6320/6340
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	6,669 lb · 3,025 kg	—
Maximum permissible mass declared	—	12,346 lb · 5,600 kg	—
Wheelbase declared	88.0 in · 2,235 mm	88.9 in · 2,257 mm	—
Length declared	151.4 in · 3,845 mm	141.9 in · 3,605 mm	+7% 695 (DT)
Width declared	73.0 in · 1,854 mm	73.0 in · 1,854 mm	—
Height declared	105.1 in · 2,670 mm	105.3 in · 2,675 mm	—
Ground clearance declared	—	22.5 in · 571 mm	—
Turning radius, braked declared	—	11.8 ft · 3.60 m	—
Fuel tank declared	118.3 qt · 112.0 L	74.0 qt · 70.0 L	+60% 695 (DT)

Source

Source