- Rigid chassis
- WhichTractor size: Utility
- Not independently tested
- 1986–1990
It was ranked on an engine power figure whose source does not say gross or net. WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
DEUTZ-ALLIS 6275 Full specifications
KHD F4L 913 four-cylinder diesel. The manufacturer claimed 73.0 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
73.0 hp
54.4 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Deutz-Allis 6275”, claimed
- Weight
- 7,826 lb
- 3-point lift
- 7,273 lb
- Hyd. flow
- 11.4 gpm
- Top speed
- 18.6 mph
DEUTZ-ALLIS 6275 specs: key facts
The DEUTZ-ALLIS 6275 was built from 1986 to 1990.
The DEUTZ-ALLIS 6275 has a claimed engine power (gross or net not stated) of 54.4 kW (73.0 hp); it has no measured PTO figure.
The DEUTZ-ALLIS 6275 was offered in two-wheel-drive and four-wheel-drive versions.
The DEUTZ-ALLIS 6275 has a KHD F4L 913 engine, a 4-cylinder 4.09 L diesel unit.Source 2
The DEUTZ-ALLIS 6275 weighs 3,550 kg (7,826 lb) unladen.
The DEUTZ-ALLIS 6275 has an independent rear PTO running at 540/1000 rpm.
The three-point hitch of the DEUTZ-ALLIS 6275 lifts 3,299 kg (7,273 lb) at the lower-link ends.
The hydraulic pump of the DEUTZ-ALLIS 6275 delivers 43.1 L/min (11.4 gpm).
Source · Traktorenlexikon, “Deutz-Allis 6275”
How much horsepower does a 6275 have?
The only figure for the 6275 is 73.0 hp (54.4 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Deutz-Allis 6275”
What engine is in a 6275?
A 6275 has a KHD F4L 913, a 4-cylinder 4.09 L diesel engine.
| Make & model | KHD F4L 913Source 2 |
|---|---|
| Cylinders | 4, air-cooledSource 2 |
| Displacement | 249.3 ci · 4.09 LSource 2 |
| Max torque | 187 lb·ft · 254 N·m @ 1,603 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Deutz-Allis 6275”
How much will a 6275 lift, and what is its hydraulic flow?
A 6275 lifts 7,273 lb (3,299 kg) at the lower-link ends.
| System | Open centre |
|---|---|
| Pump flow | 11.4 gpm · 43.1 L/min |
| Pressure | 3,481 psi · 240 bar |
| Lift at ends | 7,273 lb · 3,299 kg |
| Rear PTO | Independent, engine-driven, 540/1000 rpm |
| PTO shaft | 1 3/8"- 6 splines and 1 3/8"- 21 parts |
Source · Traktorenlexikon, “Deutz-Allis 6275”
What transmission does a 6275 have?
Transmission specifications for the 6275 are below.
| Clutch | Independent dry double clutch |
|---|---|
| Brakes | Pedal-operated hydraulic drum brakes |
| Steering | Hydrostatic DANFOSS steering |
| Top speed | 18.6 mph · 30 km/h |
Source · Traktorenlexikon, “Deutz-Allis 6275”
How much does a 6275 weigh?
A 6275 weighs 7,826 lb (3,550 kg) unladen.
| Unladen weight | 7,826 lb · 3,550 kg4 WD: 3,780 kg |
|---|---|
| Wheelbase | 91.6 in · 2,327 mm4 WD: 2,394 |
| Length | 155.5 in · 3,950 mm |
| Width | 82.3 in · 2,090 mm |
| Height | 101.3 in · 2,573 mm |
| Ground clearance | 18.0 in · 457 mm4 WD: 355 |
| Front track | 55.1–74.8 in · 1,400–1,900 mm1,500-1,650 |
| Rear track | 59.8–79.5 in · 1,520–2,020 mm |
Source · Traktorenlexikon, “Deutz-Allis 6275”
Which tractors compare with a 6275?
Within 10% of its 73.0 hp of claimed engine power, the same type, and first built within 15 years of it.
- Massey Ferguson MF 185 Super (A)73.1 hp engine, claimed · 1971–1976Side by side with the 6275 →
- Fendt Farmer 30774 hp engine, claimed · 1993–1998Side by side with the 6275 →
- Massey Ferguson MF 3055 (A)74 hp engine, claimed · 1993–1995Side by side with the 6275 →
- CASE-INTERNATIONAL 695 (DT)72.0 hp engine, claimed · 1990–1993Side by side with the 6275 →
- ZETOR 6320/634072.0 hp engine, claimed · 1993–2007Side by side with the 6275 →
- SAME Centurion 75 (DT)72.0 hp engine, claimed · 1978–1985Side by side with the 6275 →
Everything else people ask
Is a 6275 two-wheel drive or four-wheel drive?
The DEUTZ-ALLIS 6275 was offered in two-wheel-drive and four-wheel-drive versions.
What PTO does a 6275 have?
A 6275 has a independent 540/1000 rpm rear PTO on a 1 3/8"- 6 splines and 1 3/8"- 21 parts shaft.
Where this page comes from
Compiled from Traktorenlexikon, “Deutz-Allis 6275”; and Traktorenlexikon, “Deutz-Fahr DX 3.90”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Deutz-Allis 6275 — CC BY-SA 4.0, WIKIBOOKS-TL-122406 · revision 1083163. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Deutz-Fahr DX 3.90 — CC BY-SA 4.0, WIKIBOOKS-TL-32890 · revision 1059337. Wikibooks contributors (Traktorenlexikon). Original document