11 material differences · fewer than 12

Tractor oneCASE-INTERNATIONAL 695 (DT)1990–1993No measured PTO figureTractor twoNew Holland TD 75 D (A)2002–2004No measured PTO figure

Which should you choose?

Read our verdict on the 695 (DT) and the TD 75 D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 4 fields identical or within 5%, which is not counted as material

CASE-INTERNATIONAL 695 (DT) and New Holland TD 75 D (A), field by field
Field	695 (DT)	TD 75 D (A)	Gap
Engine
Engine power, claimed claimed	72.0 hp	72.0 hp	—
Engine declared	IHC D-239	IVECO 8045.06-406	differs
Displacement declared	3.91 L	3.61 L	+8% 695 (DT)
Maximum torque declared	163 lb·ft · 221 N·m	153 lb·ft · 208 N·m	+6% 695 (DT)
Transmission
Top speed declared	21.7 mph · 35 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated dry Rockford single-plate clutch designed as driving clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Pump flow declared	—	11.9 gpm · 45.2 L/min	—
Pressure declared	2,698 psi · 186 bar	3,553 psi · 245 bar	+32% TD 75 D (A)
Three-point lift, at the coupling points declared	5,351 lb · 2,427 kg	6,614 lb · 3,000 kg	+24% TD 75 D (A)
Rear PTO speeds declared	540/1000 rpm	540 rpm / 1000 rpm	differs
Weight & dimensions
Unladen weight declared	6,832 lb · 3,099 kg	6,010 lb · 2,726 kg	+14% 695 (DT)
Wheelbase declared	88.0 in · 2,235 mm	90.7 in · 2,305 mm	—
Length declared	151.4 in · 3,845 mm	153.0 in · 3,885 mm	—
Width declared	73.0–92.7 in · 1,854–2,354 mm	75.9–95.6 in · 1,928–2,428 mm	—
Height, over the cab declared	105.1 in · 2,670 mm	97.3 in · 2,472 mm	+8% 695 (DT)
Ground clearance declared	—	10.6 in · 270 mm	—
Fuel tank declared	118.3 qt · 112.0 L	97.2 qt · 92.0 L	+22% 695 (DT)

Source

Source