- Rigid chassis
- WhichTractor size: Standard-size
- Not independently tested
- 1979–1983
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
VALMET 903/903-4 Full specifications
VALMET 411 CS four-cylinder diesel. The manufacturer claimed 92.7 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
92.7 hp
69.1 kW as stated by the source
Not independently tested
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Valmet 903”, claimed
- Weight
- 8,047 lb
- 3-point lift
- 6,393 lb
- Hyd. flow
- 11.4 gpm
- Top speed
- 18.6 mph
VALMET 903/903-4 specs: key facts
The VALMET 903/903-4 was built from 1979 to 1983.
The VALMET 903/903-4 has a claimed engine power (gross or net not stated) of 69.1 kW (92.7 hp); it has no measured PTO figure.
The VALMET 903/903-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
The VALMET 903/903-4 has a VALMET 411 CS engine, a 4-cylinder 4.40 L diesel unit.Source 1
The VALMET 903/903-4 weighs 3,650 kg (8,047 lb) unladen.
The VALMET 903/903-4 has an independent rear PTO running at 540 rpm.
The three-point hitch of the VALMET 903/903-4 lifts 2,900 kg (6,393 lb) at the lower-link ends.
The hydraulic pump of the VALMET 903/903-4 delivers 43.0 L/min (11.4 gpm).
Source · Traktorenlexikon, “Valmet 903”
How much horsepower does a 903/903-4 have?
The only figure for the 903/903-4 is 92.7 hp (69.1 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Valmet 903”
What engine is in a 903/903-4?
A 903/903-4 has a VALMET 411 CS, a 4-cylinder 4.40 L diesel engine.
| Make & model | VALMET 411 CS |
|---|---|
| Cylinders | 4, liquid-cooledSource 2 |
| Displacement | 268.3 ci · 4.40 L |
| Max torque | 236 lb·ft · 320 N·mSource 2 |
| Electrical system | 12 VSource 2 |
Source · Traktorenlexikon, “Valmet 802”
How much will a 903/903-4 lift, and what is its hydraulic flow?
A 903/903-4 lifts 6,393 lb (2,900 kg) at the lower-link ends of its Category 2 three-point hitch.
| Pump flow | 11.4 gpm · 43.0 L/min |
|---|---|
| Hitch category | Category 2 |
| Lift at ends | 6,393 lb · 2,900 kg |
| Rear PTO | Independent, engine-driven, 540 rpm @ 1,556 engine rpmEngages under loadGround-speed PTO available |
Source · Traktorenlexikon, “Valmet 903”
What transmission does a 903/903-4 have?
Transmission specifications for the 903/903-4 are below.
| Top speed | 18.6 mph · 30 km/h |
|---|
Source · Traktorenlexikon, “Valmet 903”
How much does a 903/903-4 weigh?
A 903/903-4 weighs 8,047 lb (3,650 kg) unladen.
| Unladen weight | 8,047 lb · 3,650 kgtwo-wheel-drive version |
|---|---|
| Wheelbase | 91.7 in · 2,330 mmtwo-wheel-drive version |
| Length | 153.7 in · 3,905 mmtwo-wheel-drive version |
| Width | 77.6 in · 1,972 mmtwo-wheel-drive version |
| Height | 98.4 in · 2,499 mmtwo-wheel-drive version |
| Ground clearance | 18.1 in · 460 mmtwo-wheel-drive version |
| Front track | 61.2–74.0 in · 1,554–1,880 mmtwo-wheel-drive version |
| Rear track | 60.7–77.3 in · 1,543–1,963 mm |
| Turning radius, braked | 12.5 ft · 3.82 mtwo-wheel-drive version |
Source · Traktorenlexikon, “Valmet 903”
Which tractors compare with a 903/903-4?
Within 10% of its 89.8 hp at the PTO (claimed), the same type, and first built within 15 years of it.
- Steyr 8120 (a)89.8 hp PTO, claimed · 1978–1984Side by side with the 903/903-4 →
- Landini 10.000 (DT)90.1 hp PTO, claimed · 1978–1993Side by side with the 903/903-4 →
- Fiat 1000 Super (DT)91 hp PTO, claimed · 1976–1979Side by side with the 903/903-4 →
- Fiat 1000 Super (TD)90.7 hp PTO, claimed · 1976–1979Side by side with the 903/903-4 →
- SOMECA 1000 Super (TD)90.7 hp PTO, claimed · 1976–1979Side by side with the 903/903-4 →
- Case-IH 5230 (DT)90.8 hp PTO, claimed · 1989–1997Side by side with the 903/903-4 →
Everything else people ask
Is a 903/903-4 two-wheel drive or four-wheel drive?
The VALMET 903/903-4 was built in two-wheel drive (2WD) and four-wheel drive (4WD) versions, depending on configuration.
What PTO does a 903/903-4 have?
A 903/903-4 has a independent 540 rpm rear PTO.
Where this page comes from
Compiled from Traktorenlexikon, “Valmet 802”; and Traktorenlexikon, “Valmet 903”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Valmet 802 — CC BY-SA 4.0, WIKIBOOKS-TL-116345 · revision 997650. Wikibooks contributors (Traktorenlexikon). Original document
- Traktorenlexikon: Valmet 903 — CC BY-SA 4.0, WIKIBOOKS-TL-116352 · revision 997699. Wikibooks contributors (Traktorenlexikon). Original document