- Rigid chassis
- WhichTractor size: Utility
- No lab test on file
- 1993–1995
WhichTractor size, not the maker’s category
Derived by WhichTractor from a sourced three-point linkage. How we decide what a machine is
Steyr 9094a specs: hp, weight, years
Steyr-MWM WD 401.85 four-cylinder diesel. The manufacturer claimed 92.8 horsepower. No laboratory has tested one, so there is no measured figure at the shaft.
Engine power, claimed · gross or net not stated
92.8 hp
69.2 kW as stated by the source
No lab test on file
Claimed · standard not stated by the source
Source · Traktorenlexikon, “Steyr 9094”, claimed
This is the maker’s own figure, measured at the engine. Power at the PTO is lower — by how much, for this machine, nobody has measured.
- Weight
- 8,642 lb
- 3-point lift
- 10,031 lb
- Hyd. flow
- 14.1 gpm
- Top speed
- 18.6–24.9 mph
Steyr 9094a specs: key facts
The Steyr 9094a was built from 1993 to 1995.
The Steyr 9094a has a claimed engine power (gross or net not stated) of 69.2 kW (92.8 hp); it has no measured PTO figure.
The Steyr 9094a is four-wheel drive (4WD).
The Steyr 9094a has a Steyr-MWM WD 401.85 engine, a 4-cylinder 4.16 L diesel unit.
The Steyr 9094a weighs 3,920 kg (8,642 lb) unladen.
The Steyr 9094a has a rear PTO running at 390/540/1000 rpm.
The three-point hitch of the Steyr 9094a lifts 4,550 kg (10,031 lb) at the lower-link ends.
The hydraulic pump of the Steyr 9094a delivers 53.3 L/min (14.1 gpm).
Source · Traktorenlexikon, “Steyr 9094”
How much horsepower does a 9094a have?
The only figure for the 9094a is 92.8 hp (69.2 kW) of claimed engine power, gross or net not stated, no test standard stated — not power at the shaft.
Source · Traktorenlexikon, “Steyr 9094”
What engine is in a 9094a?
A 9094a has a Steyr-MWM WD 401.85, a 4-cylinder 4.16 L diesel engine.
| Make & model | Steyr-MWM WD 401.85 |
|---|---|
| Cylinders | 4, liquid-cooled |
| Displacement | 253.6 ci · 4.16 L |
| Max torque | 260 lb·ft · 353 N·m @ 1,500 rpm |
| Electrical system | 12 V |
Source · Traktorenlexikon, “Steyr 9094”
How much will a 9094a lift, and what is its hydraulic flow?
A 9094a lifts 10,031 lb (4,550 kg) at the lower-link ends.
| System | Open centre |
|---|---|
| Pump flow | 14.1 gpm · 53.3 L/min |
| Pressure | 3,481 psi · 240 bar |
| Lift at ends | 10,031 lb · 4,550 kg |
| Rear PTO | 390/540/1000 rpm |
| PTO shaft | 1 3/8"- 6 splines (Form-1) |
Source · Traktorenlexikon, “Steyr 9094”
What transmission does a 9094a have?
Transmission specifications for the 9094a are below.
| Clutch | Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch |
|---|---|
| Brakes | Pedal-operated wet multi-disc brake acting on differential side shafts as single-wheel brake |
| Steering | Hydrostatic ZF steering with separate oil circuit |
| Top speed | 18.6–24.9 mph · 30–40 km/hthe article lists alternatives |
Source · Traktorenlexikon, “Steyr 9094”
How much does a 9094a weigh?
A 9094a weighs 8,642 lb (3,920 kg) unladen.
| Unladen weight | 8,642 lb · 3,920 kg |
|---|---|
| Maximum permissible mass | 14,330 lb · 6,500 kg |
| Wheelbase | 97.5 in · 2,477 mm |
| Length | 165.2 in · 4,195 mm |
| Width | 81.2 in · 2,063 mm |
| Height | 107.5 in · 2,730 mm |
| Ground clearance | 17.7 in · 450 mm |
| Front track | 56.7–66.9 in · 1,440–1,700 mmthe article lists alternatives |
| Rear track | 63.0–67.1 in · 1,600–1,704 mmthe article lists alternatives |
| Turning radius, braked | 15.7 ft · 4.80 m |
Source · Traktorenlexikon, “Steyr 9094”
What oil does a 9094a take, and how much?
A 9094a engine takes 9.0 qt (8.5 L). Single source, not independently verified — always confirm against the operator’s manual for your machine.
| System | Capacity |
|---|---|
| Engine oil | 9.0 qt · 8.5 LSource: Traktorenlexikon, “Steyr 9094” · single source, not independently verified |
| Transmission | 35.9 qt · 34.0 LSource: Traktorenlexikon, “Steyr 9094” · single source, not independently verified |
| Hydraulic | 35.9 qt · 34.0 LSource: Traktorenlexikon, “Steyr 9094” · single source, not independently verified |
| Front axle | 5.3 qt · 5.0 LSource: Traktorenlexikon, “Steyr 9094” · single source, not independently verified |
| Cooling system | 12.7 qt · 12.0 LSource: Traktorenlexikon, “Steyr 9094” · single source, not independently verified |
Always confirm against the operator’s manual for your machine before service.
Which tractors compare with a 9094a?
Within 10% of its 92.8 hp of claimed engine power, the same type, and first built within 15 years of it.
- Case-Steyr M 9094a92.8 hp engine, claimed · 1994–2003Side by side with the 9094a →
- Deutz-Fahr Agroplus 9592.8 hp engine, claimed · 1997–2005Side by side with the 9094a →
- ZETOR 9520/954092.7 hp engine, claimed · 1992–1999Side by side with the 9094a →
- Case-IH CS-9492.7 hp engine, claimed · 1995–2003Side by side with the 9094a →
- Case-IH 5220 (DT)92.7 hp engine, claimed · 1989–1997Side by side with the 9094a →
- SAME Panther 95 (DT)92.7 hp engine, claimed · 1979–1981Side by side with the 9094a →
Common questions about the Steyr 9094a
Is a 9094a two-wheel drive or four-wheel drive?
The Steyr 9094a is four-wheel drive (4WD).
What PTO does a 9094a have?
A 9094a has a 390/540/1000 rpm rear PTO on a 1 3/8"- 6 splines (Form-1) shaft.
Sources and how this page was built
Compiled from Traktorenlexikon, “Steyr 9094”.
Sources
Facts taken from these documents, units converted. Numbers beside a figure refer to this list. Licences and attribution
- Traktorenlexikon: Steyr 9094 — CC BY-SA 4.0, WIKIBOOKS-TL-108116 · revision 1076985. Wikibooks contributors (Traktorenlexikon). Original document