11 material differences · fewer than 12
Tractor oneSteyr 9094 a1993–1995No measured PTO figureTractor twoVALMET 903/903-41979–1983No measured PTO figure
Which should you choose?
Read our verdict on the 9094 a and the 903/903-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 9094 a | 903/903-4 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 92.8 hp | 92.7 hp | — |
| Engine declared | Steyr-MWM WD 401.85 | VALMET 411 CS | differs |
| Displacement declared | 4.16 L | 4.40 L | +6% 903/903-4 |
| Maximum torque declared | 260 lb·ft · 353 N·m | 236 lb·ft · 320 N·m | +10% 9094 a |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6 mph · 30 km/h | differs |
| Clutch declared | Dry double clutch with pedal-operated driving clutch and hand lever-operated PTO clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 14.1 gpm · 53.3 L/min | 11.4 gpm · 43.0 L/min | +24% 9094 a |
| Pressure declared | 3,481 psi · 240 bar | — | — |
| Rear PTO speeds declared | 390/540/1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 8,642 lb · 3,920 kg | 8,047 lb · 3,650 kg | +7% 9094 a |
| Maximum permissible mass declared | 14,330 lb · 6,500 kg | — | — |
| Wheelbase declared | 97.5 in · 2,477 mm | 91.7 in · 2,330 mm | +6% 9094 a |
| Length declared | 165.2 in · 4,195 mm | 153.7 in · 3,905 mm | +7% 9094 a |
| Width declared | 81.2 in · 2,063 mm | 77.6 in · 1,972 mm | — |
| Ground clearance declared | 17.7 in · 450 mm | 18.1 in · 460 mm | — |
| Turning radius, braked declared | 15.7 ft · 4.80 m | 12.5 ft · 3.82 m | +26% 9094 a |
| Fuel tank declared | 105.7 qt · 100.0 L | 95.1 qt · 90.0 L | +11% 9094 a |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Steyr 9094 a sources
- Source: Traktorenlexikon, “Steyr 9094”
VALMET 903/903-4 sources
- Source: Traktorenlexikon, “Valmet 903”
- Source: Traktorenlexikon, “Valmet 802”