11 material differences · fewer than 12

Tractor oneCase-IH 5220 (DT)1989–1997No measured PTO figureTractor twoVALMET 903/903-41979–1983No measured PTO figure

Which should you choose?

Read our verdict on the 5220 (DT) and the 903/903-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Case-IH 5220 (DT) and VALMET 903/903-4, field by field
Field	5220 (DT)	903/903-4	Gap
Engine
Engine power, claimed claimed	92.7 hp	92.7 hp	—
Engine declared	CUMMINS NCE 4 T-390	VALMET 411 CS	differs
Displacement declared	3.92 L	4.40 L	+12% 903/903-4
Maximum torque declared	237 lb·ft · 321 N·m	236 lb·ft · 320 N·m	—
Transmission
Top speed declared	15.5–24.9 mph · 25–40 km/h	18.6 mph · 30 km/h	differs
Hydraulics & hitch
Hydraulic control declared	Load sensing	—	—
Pump flow declared	19.6 gpm · 74.3 L/min	11.4 gpm · 43.0 L/min	+73% 5220 (DT)
Pressure declared	3,191 psi · 220 bar	—	—
Rear PTO speeds declared	635/1000 rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	8,818 lb · 4,000 kg	8,047 lb · 3,650 kg	+10% 5220 (DT)
Maximum permissible mass declared	16,535 lb · 7,500 kg	—	—
Wheelbase declared	107.5 in · 2,730 mm	91.7 in · 2,330 mm	+17% 5220 (DT)
Length declared	163.0 in · 4,140 mm	153.7 in · 3,905 mm	+6% 5220 (DT)
Width declared	79.7 in · 2,025 mm	77.6 in · 1,972 mm	—
Height, over the cab declared	105.2 in · 2,672 mm	98.4 in · 2,499 mm	+7% 5220 (DT)
Ground clearance declared	22.1 in · 561 mm	18.1 in · 460 mm	+22% 5220 (DT)
Turning radius, braked declared	—	12.5 ft · 3.82 m	—
Fuel tank declared	179.6 qt · 170.0 L	95.1 qt · 90.0 L	+89% 5220 (DT)

Source

Source